曲面边界的英文

• surf edge
• surface edge

• "曲面"英文翻译    hook face; curve; curved sur ...
• "边界"英文翻译    boundary; frontier; border; ...
• "曲面边界曲线" 英文翻译 :    surface edge curve
• "表面边界层" 英文翻译 :    surface boundary layer; surfaceboundarylayer
• "地面边界" 英文翻译 :    ground board
• "地面边界层" 英文翻译 :    surface boundary layer; surfaceboundarylayer
• "界面边界" 英文翻译 :    interfacial boundary
• "孪晶面边界" 英文翻译 :    twin boundary; twin plane boundary; twin-plane boundary
• "平面边界" 英文翻译 :    plane boundary
• "平面边界层" 英文翻译 :    plan boundary layer
• "软页面边界" 英文翻译 :    soft page break
• "页面边界" 英文翻译 :    margin for page; page boundary
• "颗粒界面边界" 英文翻译 :    interfacial grain boindary
• "孪晶平面边界" 英文翻译 :    twin plane boundary
• "自由表面边界" 英文翻译 :    free surface boundary
• "创建表面边界曲线" 英文翻译 :    create surface edge curve
• "边界曲面" 英文翻译 :    boundary surface; bounding surface; edge curve surface; edge surface; edgesurf
• "带边界曲面" 英文翻译 :    boundary surface
• "重建曲面边缘的组成架构。" 英文翻译 :    rebuildedges
• "弹性波反射自一平面边界" 英文翻译 :    reflection of elastic waves from a plane boundary
• "更改曲面起始边界" 英文翻译 :    change start point
• "曲面的定向边界" 英文翻译 :    oriented boundary of surface
• "依边界曲线建构曲面" 英文翻译 :    blend w/boundary curves
• "背面边" 英文翻译 :    back side edge
• "正面边" 英文翻译 :    front side edge

• Tangency is controlled by the first two control points from a surface boundary , assuming that these points lie in one line
  相切是由曲面边界的最初两个控制点控制的（假设这些点在一条线上） 。
• Method of edge curve replacement is used to reach gc0 connection of two surface . method same as bezier gc1 connection is used because qurbs surface has same geometrical property as bezier surface on the boundary
  采用准均匀b样条曲面逼近方法，在曲面边界处具有bezier曲面的性质，用bezier曲面的gc ~ 1拼接算法实现了拼接。
• To interpolate the given ship offset data , the ship - hull surface is represented successfully by nurbs . the boundary conditions computation and knots vector construction are detailed in nurbs curve and surface interpolation
  本文根据船体型值表的数据，用nurbs曲面来描述完整船体曲面，对插值曲面边界条件构造及节点矢量计算进行了研究，实现了船体曲线曲面的nurbs表达。
• Then the reconstruction of curved surface of the covering parts was taken for an example , and the emphasis is laid on the identification and extraction method of the characteristic and the boundary , and the reconstruction method of curved surface . meanwhile it was given emphasis to the partition strategy of the data of point cloud , the forward direction design of the process of re , and so on
  在此基础上，以覆盖件曲面重构为例，重点研究了点云数据的分块策略、曲面特征的识别和提取方法、曲面边界提取和曲面重构方式，以及反求过程中的正向设计等。
• According to the comparison between simulation results and laboratory measurements , this paper reaches the conclusion that the negative pressure region in convex boundary ( including broken line gradient ) not only caused by boundary layer separation , but also especially caused by centrifugal force which is the result of convex boundary
  根据数值计算与模型试验结果的比较，得出具有凸形曲面边界（包括折面底坡）负压区的存在不仅是边界层分离所致，边壁弯曲使过流产生的离心力也是产生负压的重要原因的结论。