机床加工的的英文

• machine-tooled

• "机床"英文翻译    machine tool
• "加工"英文翻译    process; machining; working; ...
• "的"英文翻译    4次方是 The fourth power of 2 i ...
• "机床加工精度" 英文翻译 :    machine finish
• "数控机床加工" 英文翻译 :    cnc
• "旋床加加工的木配件" 英文翻译 :    turned wooden articles
• "用车床加工" 英文翻译 :    lathe
• "加工的" 英文翻译 :    prepared; wrought
• "车削车床加工" 英文翻译 :    lathe turning
• "在机床上加工的棒料最大直径" 英文翻译 :    bar capacity
• "（未加工的）原汁" 英文翻译 :    raw juice
• "半加工的" 英文翻译 :    half blank; half finished; half-black; half-blank; half-finished; raw; semi-finished
• "半精加工的" 英文翻译 :    half finished; semi-finished
• "玻璃加工的" 英文翻译 :    glass-processing
• "粗加工的" 英文翻译 :    rough machined; roughwrought; unfinished
• "光亮加工的" 英文翻译 :    bright machined
• "机加工的" 英文翻译 :    machined
• "机械加工的" 英文翻译 :    machined; machining
• "加工的坡口" 英文翻译 :    finished edge
• "精加工的" 英文翻译 :    accurately machined; precision-machined
• "精密加工的" 英文翻译 :    precision machined
• "可机加工的" 英文翻译 :    machinable
• "可加工的" 英文翻译 :    machinable; workable
• "可冷加工的" 英文翻译 :    cold workable; cold-workable
• "可热加工的" 英文翻译 :    hot workable

• The result of experiment proved that the software and hardware architecture of this 3 - axis cnc system is feasible , and can satisfy the requirements of the cnc system
  结果证明软硬件设计方案是可行的,可满足微小型机床加工的要求。
• The final results in the form of control pulses are output to servo system in order to drive the stepper motors , simulating the milling procedure of numerical control tool machine
  最终将处理结果以控制脉冲形式输出给伺服系统，以控制步进电机的进给，达到模拟数控机床加工的目的。
• The apsp produced abroad is made by numerical controlled machine tool , which has noise level of 71db ( a ) , the apsp produced in our country is made in the method of exploratory which has noise level of 73db ( a ) and 75db ( a ) . in order to analyze the influence of stator curve to noise , the author used tri - coordinate measuring instrument to measured exactly the inside surface of stator and got the straddling point coordinate , and made curve fitting by using matlab as language and studied the fitting effect and then worked out the equation of stator transition curve in return seeking , then comparied this method with the standard style and made the conclusion : the equation of atator transiting curve of apsp made by numerical controlled machine tool is close to theorical 5 power curve standard style , but compared with it , the stator transiting curve of apsp produced in exploratory has a major error . combining the testing results of noise , one can know that the qualily of stator transition curve play an importance to t he noise of the pump
  国外生产的汽车动力转向泵是用数控机床加工的，其噪声值为71db ( a ) ，国内生产的汽车动力转向泵是用靠模方法加工的，其噪声值分别为73db ( a )和75db ( a ) ，为了分析定子曲线对泵的噪声的影响，本人用三坐标测量仪对定子内表面进行精密测量，获得定子内表面的离散点坐标，以matlab语言为工具对离散点进行曲线拟合，观察拟合效果，然后，用回归方法求出了定子过渡曲线的方程，并把该方程与理论方程标准型进行了比较，得出如下结论：用数控机床生产的汽车动力转向泵的定子过渡曲线方程非常接近理论5次曲线标准型，而用靠模方法加工的汽车动力转向泵的定子过渡曲线与理论5次曲线标准型相比较，则存在着较大的误差，结合噪声测试结果可知，定子过渡曲线的优劣，对泵的噪声大小有着重要的影响。