栓钉的英文

• cotter
• peg
• toggle pin

• "栓"英文翻译    bolt; plug
• "钉"英文翻译    nail; tack
• "暗栓钉" 英文翻译 :    dumfastening
• "螺栓钉" 英文翻译 :    tabolt
• "栓钉垫" 英文翻译 :    pin filler
• "栓钉錾" 英文翻译 :    cant chisel
• "大头钉，栓钉" 英文翻译 :    stud
• "地界栓钉" 英文翻译 :    boundary peg
• "假龙骨栓钉" 英文翻译 :    keel staple
• "栓钉开关" 英文翻译 :    peg switch
• "支承栓钉" 英文翻译 :    bearing pin
• "桥台锚固栓钉" 英文翻译 :    abutment anchor bar
• "海斯栓钉入板测验" 英文翻译 :    hayes pegboard test
• "以栓钉标明地界" 英文翻译 :    peg out the boundary
• "以栓钉标明地界；量定地界" 英文翻译 :    peg out the boundary
• "用来固定两物在一起的栓钉" 英文翻译 :    toggle
• "栓调" 英文翻译 :    thrombomodulin
• "栓道" 英文翻译 :    key way; keywy
• "栓冲" 英文翻译 :    bolt punch
• "栓顶桅" 英文翻译 :    fidded tomast
• "栓翅卫矛" 英文翻译 :    euonymus phelomanes
• "栓定浮筏" 英文翻译 :    reefing float
• "栓槽轴磨床" 英文翻译 :    spline shaft grinder

• Influence of gap on stud penetration welding process and its countermeasures
  间隙对栓钉穿透焊过程的影响及其对策
• Construction of changing strut in long - span steel pipe concrete strut arch bridge
  混凝土组合结构中栓钉的承载力的研究
• Peg out the boundary
  以栓钉标明地界
• By using the types of stiffeners , the thickness of the composite panels and the arrangement of the goggle pins as the parameters , mechanical performance tests were made on 9 composite panels
  以加劲肋形式、组合板厚度和栓钉布置为参数，进行了9块组合板的力学性能试验。
• However , the stud welding roots in the negative moment region of the beam are often subjected to the joint action of shear stress cycling of the studs and tensile stress cycling of steel girder flanges
  但在负弯矩处栓钉焊趾往往承受栓钉剪应力循环和钢梁翼缘拉应力循环的共同作用。
• The test results indicated that the performance of the composite panels can be well displayed if the types of steel stiffeners were adequately selected , the goggle pins were rationally laid out and the thickness of concrete was apropriately determined
  试验结果表明，通过适当地选择型钢加劲肋形式、合理地布置栓钉和确定混凝土厚度，可以保证组合作用的发挥。
• Abstract : in this article , some high - rise steel structural lifting methods , including choice of lifting machines , lifting method , measurement and correction of columns and beams , installment of high - strengthen bolts , and welding of pegs of profiling steel boards , are introduced
  文摘:介绍高层钢结构吊装机械的选择，梁柱的吊装方法和测量校正，高强螺栓的安装，压型钢板栓钉的焊接。
• Summarizing the above - mentioned research results , the design method of two kinds of connection ways of steel braces is proposed , which include the calculation formula of the steel braces , the head studs , steel angels at four corners of beam and column and embedded steel framework
  本文在上述试验的基础上，提出了两种支撑加固连接方式的计算公式，包括支撑杆件、栓钉、外包钢连接和钢内框连接等。
• When the elastic design method is used , the paper proposes the recommendation that designer can not consider second - order effect on structural internal force , but must consider the effect on drift computing , and also gives a simplification method for calculating the second - order drift . base on above research achievements and referencing current design codes and research documents , this text has done overall discussions on the elastic design method , the chief works includin
  基于前面的研究成果，参考现有各国钢结构设计规范和已有的研究文献，本文首次对钢结构错列析架体系的弹性设计方法作了全面的探讨，主要工作包括材料的选用、构件截面形式、构件弹性设计方法、连接节点设计和构造详图、组合楼盖的设计、栓钉剪力连接件的设计。
• The paper made up a flexural experiment with six pieces of composite slab . during the every step of load exerted , the paper recorded the strain of cold - form steel deck and concrete , deflection , crack , slide , ultimate bearing capacity . by changing the thickness of cold - form deck , thickness and strength of concrete , amount of steel stud and other parameters , the paper discussed the behavior of loaded composite - slab
  本文进行6块组合板的抗弯性能试验，测试各级荷载下压型钢板及砼应变、组合板挠度、裂缝、板端滑移、组合板抗弯极限承载力；通过压型钢板厚度、砼板厚度、砼强度等级、栓钉数量等几个参数的变化，探讨组合板在荷载作用下的内力、变形情况。

• 栓钉的俄语：шип