法向分量的英文

• normal component

• "法向"英文翻译    normal; heave
• "速度法向分量" 英文翻译 :    normal velocity component
• "惯性载荷法向分量" 英文翻译 :    natural inertia loading component
• "马赫数法向分量" 英文翻译 :    normal mach-number component
• "应力的法向分量" 英文翻译 :    normal component of stress
• "向分量" 英文翻译 :    tangential component
• "法向分力" 英文翻译 :    normal component of force; vertical component force
• "法向分速度" 英文翻译 :    normal velocity component
• "侧向分量" 英文翻译 :    cross component; side component
• "垂向分量" 英文翻译 :    vertical component
• "东向分量" 英文翻译 :    easting
• "方向分量" 英文翻译 :    direction component
• "横向分量" 英文翻译 :    crab component; cross component; cross coponent; cross stream component; transverse component
• "径向分量" 英文翻译 :    radial component
• "迷向分量" 英文翻译 :    isotropic component
• "南向分量" 英文翻译 :    southing
• "切[线方]向分量" 英文翻译 :    tangential component
• "切向分量" 英文翻译 :    tangential component
• "视向分量" 英文翻译 :    line-of-sight component
• "弦向分量" 英文翻译 :    chord component; chordwise component; chordwise mode
• "轴向分量" 英文翻译 :    axial component; x-component x; y-component y; z-component z
• "法向速度分量" 英文翻译 :    normal velocity component
• "船速北向分量" 英文翻译 :    northerly motion of vessel
• "船速东向分量" 英文翻译 :    easterly motion of vessel
• "过荷侧向分量" 英文翻译 :    transverse g load

• The shape and character of the zero line , an important criterion for magnetic memory testing of the normal field is analyzed under different longitudinal magnetization
  研究了管件处于外部弱磁场的缺陷段的位置对表面磁场法向分量零值线分布的影响。
• The results showed that the character of the zero line should be considered when using metal magnetic memory testing method to find and locate the defects
  结果表明，利用磁记忆方法作无损检测，寻找和定位缺陷段位置时，应该考虑法向分量零值线的这种分布特征。
• Because the field caused by the eddy - current transducer in the dissertation is not only axially symmetrical , but also plane symmetrical , there is no normal component of the electrical field strength and we cannot apply the condition en = 0 to solve such a problem
  由于本文中的涡流传感器模型，其电磁场不仅是轴对称场，而且还是平面对称场，不含有电场强度的法向分量，所以无法利用边界条件e _ n = 0来求解。
• When a ferromagnetism items is under the application of stress , the phenomenon that the tangential component of magnetic leakage field has maximum value and that the normal component of magnetic leakage field changes polarity and acquires zero value at the stress concentration zone will take place
  铁磁性工件在受到应力作用时，在应力集中处会有漏磁场的切向分量出现最大值、同时法向分量改变符号且过零值点的现象。
• For the scattering field caused by the finite - length conducting and permeable cylinder , the boundary condition that the normal component of electrical strength is zero in conducting medium , i . e . en = 0 , was used to determine the separation constant of boundary value problem in the past
  以往含有有限长导电导磁圆柱体散射场的求解，大都根据导电媒质中电场强度法向分量为零，即e _ n = 0 ，这一边界条件来确定边值问题中分离常数的取值。
• Considering that the ferrite core is often made from good permeable material , the dissertation presents the condition that the normal component of the magnetic field strength is zero approximately at the inside surface of good permeable material , i . e . bn = 0 to determine the eigenvalues for the separation constant . during the solving process , the solenoid coil is supposed to be wound closely by infinite symmetrical delta - coils
  考虑到磁芯通常是由导磁性能非常好的软磁材料构成，本文提出利用靠近良导磁材料内侧磁场强度法向分量近似为零，即b _ n 0 ，这一边界条件，来确定边值问题中的本征值。
• According to the effective field expression which has been derived in former , the phenomenon that the tangential component of magnetic leakage field has maximum value and the normal component of magnetic leakage field acquires zero value at the stress concentration zone of positive magnetostriction ferromagnetism materials under the application of tensile stress and negative magnetostriction ferromagnetism materials under the application of compressive stress is explained theoretically through analyzing and discussing
  根据所得到的地磁场中受力铁磁性材料有效场表达式，通过分析讨论，解释了受拉力作用的正磁致伸缩铁磁材料和受压力作用的负磁致伸缩材料在应力集中处漏磁场切向分量出现最大值、同时法向分量为零值的现象。