法向应力的英文

• direct stress
• normal stress
• normalstre
• stress; normal

• "法向"英文翻译    normal; heave
• "应力"英文翻译    stress; strain; tension; cha ...
• "法向应力泵" 英文翻译 :    normal stress pump
• "法向应力差" 英文翻译 :    normal stress difference
• "正法向应力" 英文翻译 :    normal stress
• "垂直法向应力" 英文翻译 :    vertical normal stress
• "法向应力系数" 英文翻译 :    normal stress coefficient
• "法向应力现象" 英文翻译 :    normal stress phenomena
• "法向应力效应" 英文翻译 :    normal stress effect
• "临界法向应力" 英文翻译 :    critical normal stress
• "有效法向应力" 英文翻译 :    effective normal stress
• "最大法向应力" 英文翻译 :    maximum normal stress
• "最小法向应力" 英文翻译 :    minimum normal stress
• "八面体法向应力" 英文翻译 :    mean stress; octahedral normal stress
• "第二法向应力差" 英文翻译 :    second normal-stre difference; second normal-stress difference
• "第一法向应力差" 英文翻译 :    first normal-stre difference; first normal-stress difference
• "最大法向应力理论" 英文翻译 :    maximum normal stress theory
• "法向应变" 英文翻译 :    normal strain
• "最大法向应变" 英文翻译 :    maximum normal strain
• "反应力, 反向应力" 英文翻译 :    uplift stress
• "正应力；正向应力" 英文翻译 :    normal stress
• "侧向应力" 英文翻译 :    lateral stress
• "单向应力" 英文翻译 :    pure stress; uniaxial stress; unidirectional stress
• "单轴向应力" 英文翻译 :    uniaxial stress
• "多向应力" 英文翻译 :    multiaxial stress

• Cohesion is best defined in terms of the plot of shear stress versus normal stress given in figure 9 .
  粘结力最好根据图9中剪切应力和法向应力的关系曲线确定。
• Friction and cohesion are best defined in terms of the plot of shear stress versus normal stress given in figure 9 .
  摩擦角和粘结力最好是根据图9中剪切应力和法向应力的关系曲线确定。
• Second normal - stress difference
  第二法向应力差
• First normal - stress difference
  第一法向应力差
• Critical normal stress
  临界法向应力
• Maximum normal stress
  最大法向应力
• Normal stress distribution on the inner cylinder forced by power law fluid flowing in annulus with inner cylinder executing a planetary motion
  幂律流体在内管做行星运动的环空中流动时的内管法向应力分布
• The mohr - coulomb criterion assumes that failure occurs when the shear stress on any point in a material reaches a value that depends linearly on the normal stress in the same plane
  莫尔库仑准则假定破坏发生在材料中任意点的剪应力某一值，该值线性依赖于在该面的法向应力。
• The long term strength prediction method is put forward under the assumption that cohesion c varies in the same way as friction angle , and shearing stress varies in the same way as normal stress
  依据双曲线应力应变关系，假设堆石结构强度c与内摩擦角的变化规律相同，剪应力与法向应力的变化规律相同，得出堆石长期强度的求解方法与过程。
• As for side box girder , the elastic theoretical solution has been introduced . the method is based on stress function and regards side box girder as combine of plate element and shell element . then the force and stress formulae for flanges have been derived
  对于边箱式截面主梁，本文介绍了弹性理论解法，基于翼板单元应力函数，将边箱梁视为板单元和筒壳单元的组合体，从弹性力学出发，推导出板中法向应力。

• 法向应力的法语：contrainte normale