注入速率的英文

• injection flow rate
• rate of injection

• "注入"英文翻译    pour into; empty into; inpou ...
• "速率"英文翻译    speed; rate; tempo
• "空穴注入速率" 英文翻译 :    hole injection rate
• "目前注入速率" 英文翻译 :    current injection rate
• "进入速率" 英文翻译 :    entry rate
• "流入速率" 英文翻译 :    influx rate; rate of influx
• "切入速率" 英文翻译 :    rate of intercept
• "渗入速率" 英文翻译 :    infiltration rate
• "输入速率" 英文翻译 :    i ut rate; incoming rate; input rate
• "写入速率" 英文翻译 :    speed; writing; writing rate; writing speed
• "再入速率" 英文翻译 :    speed; re-entry
• "阶段注入速度" 英文翻译 :    interval rate of injection
• "空穴注入速度" 英文翻译 :    hole-injection rate
• "平均注入速度" 英文翻译 :    air
• "设计注入速度" 英文翻译 :    design injection rate
• "接入速率限制" 英文翻译 :    committed access rate
• "能量输入速率" 英文翻译 :    rate of energy input
• "热量输入速率" 英文翻译 :    heat input rate
• "土壤渗入速率" 英文翻译 :    soil infiltration rate
• "最高写入速率" 英文翻译 :    maximum writing rate
• "输入速度；注入速度；进料速度" 英文翻译 :    input speed
• "体积空气注入速度" 英文翻译 :    volumetric air injection rate
• "注入速度测定装置" 英文翻译 :    irma
• "承诺的接入速率" 英文翻译 :    car committed access rate
• "控制棒插入速率" 英文翻译 :    control rod insertion speed

• The txrate parameter is the injection rate
  Txrate参数就是注入速率。
• An injection rate of 1 maps roughly to 13 concurrent clients
  如果注入速率为1 ，则对应着大约有13个并发客户机。
• In the specjappserver2004 benchmark , the size of the system is specified by the injection rate
  在specjappserver2004基准中，系统的大小是由注入速率（ injection rate ）指定的。
• To load the database , we use the loaddb . bat script where the injection rate is passed in as a parameter
  为了装载数据库，我们使用loaddb . bat脚本，并在其中以参数的形式传递注入速率。
• For example , the commands below will delete the data in the database and load the database supporting an injection rate of 10
  例如，下面的命令将删除数据库中的数据，并装载支持注入速率10的数据库：
• The configuration supports an injection rate of 785 , which translates to roughly 10 , 000 concurrent users , and produced more than 1 , 300 business transactions per second
  该配置支持785的注入速率，相当于大约10 , 000个并发用户，每秒钟产生1 , 300多条业务事务。
• During the setup in the previous sections , a database that is supporting a small number of users injection rate 2 has been created and the corresponding load has been applied to the system for functional testing purpose
  在前面几节的安装中，创建了一个只支持少量的用户（注入速率为2 ）的数据库，并对系统应用了相应的负载，以进行功能测试。
• In section one , we analyze the mechanism of lwi gain , and study the effects of the rabi frequency q of the driving field , the injection rates ratio rb / r ~ , the exit rate r0 , the decay rates ~ and rab between atomic levels , as well as 3 incoherent pump rate r on the gain without inversion , dispersion and population difference of the system . in section two , we discuss the effects of the detuning of the driving field and the probe field on the gain
  在第一节中分析了无粒子数反转激光增益产生的机制、研究了驱动场的rabi频率、粒子注入速率比值r _ b / r _ c 、粒子退出速率r _ o 、能级间的自发衰减速率r _ ( c - b ) 、 r _ ( a - b )和非相干泵浦速率r对增益、色散和粒子数差的影响；第二节讨论了驱动场和探测场的失谐对无粒子数反转激光增益的影响。
• In chapter 3 , we studied the effect of gaussian transverse profile for the driving and laser fields on lasing without population inversion ( lwi ) in a closed v - type system and an open v - type system . moreover , we discussed also the effect of the unsaturated gain coefficient , the cavity - damping rate , the ratio of the atomic injection rates and atomic exit rate on the corresponding systems . in chapter 4 , we mainly discussed the effect of doppler broadening on the gain , dispersion and the frequency up - conversion of the open v - type lwi system and compared the differences and the same between the open system and the corresponding closed system
  发现： ( 1 )在考虑doppler展宽的情况下，通过选取合适的实验室条件(比如合适的原子环境温度等)可得到合适doppler展宽值，从而使系统获得最佳增益； ( 2 )要想实现系统的频率上转换，同时又要获得足够强的无反转激光增益，则系统频率转换比不能选取的太大； ( 3 )对于开放系统，比较小的粒子注入速率比与退出速率对产生无反转激光是有利硕士学位论文摘要的： （ 4 ）由于dopp1oy展宽的存在，当探测场与驱动场的传播方向相反时，增益在探测场失谐的某一段区域产生振荡，且振荡的振幅、频率失谐范围的大小与dopper展宽的取值有关。
• Using commercial finite element software ansys , the numerical simulations of the forming processes of decorated rib and handle , which are key positions in the door outer are conducted and investigated the differences of vpf and tradition forming . by using numerical simulation that investigates the effects of viscous injection flow rate on plank ’ s vpf formability and based on those investigated four - aluminum alloy ’ s vpf . the die has been designed for the door outer ’ s viscous pressure forming
  首先采用商用有限元分析软件ansys对车门成形中的关键部位装饰筋和把手的成形进行了数值模拟,对比分析了粘性介质压力成形与刚性模成形的特点;分析了粘性介质压力成形过程中,粘性介质的注入速率对成形试件壁厚分布的影响,在此基础上对四种常用的6000系列铝合金板材的粘性介质压力成形进行了有限元数值模拟。