活塞裙的英文

• piston bottom
• piston skirt
• skirt

• "活塞"英文翻译    plunger; stop; bibb cock; bi ...
• "裙"英文翻译    skirt
• "沟槽活塞裙" 英文翻译 :    split piston skirt; split skirt
• "活塞裙部" 英文翻译 :    piston skirt
• "活塞裙故障" 英文翻译 :    collapse of piston skirt
• "整体活塞裙" 英文翻译 :    solid skirt
• "滑履式活塞裙" 英文翻译 :    slipper skirt
• "活塞裙部挤扁" 英文翻译 :    collapse of piston skirt
• "活塞裙部涨圈" 英文翻译 :    apron ring
• "活塞裙扩大器" 英文翻译 :    piston skirt expander
• "活塞裙扩大衬簧" 英文翻译 :    piston skirt expander; solid skirt
• "沟槽活塞裙 开缝活塞导缘" 英文翻译 :    splitskirt
• "活塞" 英文翻译 :    plunger; stop; bibb cock; bib(b); [机械工程] piston; gas piston; headed piston◇活塞杆 piston rod; 活塞环 [设计]packing ring;piston ring;piston ring tongs; 活塞密封圈 piston packing; piston seal; 活塞圈 piston ring; 活塞筒 piston cylinder; 活塞头 piston head; piston crown; 活塞碗 piston cup; 活塞下降行程 downstroke; 活塞销 wrist pin
• "活塞（第二活塞）" 英文翻译 :    piston (second)
• "活塞头,活塞冠" 英文翻译 :    piston head (or crown)
• "t槽活塞" 英文翻译 :    t slot piston; t-slot piston
• "泵活塞" 英文翻译 :    pump piston
• "导活塞" 英文翻译 :    guide piston
• "短活塞" 英文翻译 :    short circuiting piston
• "腐活塞" 英文翻译 :    floating piston
• "后活塞" 英文翻译 :    back piston
• "活门；活塞" 英文翻译 :    valve
• "活塞, 管闩" 英文翻译 :    stop-cock
• "活塞，柱塞" 英文翻译 :    piston; plunger
• "活塞，搋子" 英文翻译 :    plunger

• The worn - out guide ring of the piston skirt should be renewed
  活塞裙上磨损了的倒换应该换新。
• Collapse of piston skirt
  活塞裙部挤扁
• Hydrodynamic lubricating characters of piston skirt profile in internal combustion engine
  内燃机活塞裙部的流体动力润滑特性
• Piston skirt expander
  活塞裙扩大衬簧
• With this type of skirt excellent matches between skirt and liner can he achieved and piston scraping eliminated
  该型活塞裙部与气缸套贴合良好，无拉缸擦伤现象。
• Analysis to the accident causes for piston falling off in the fourth cyliknder of dqh main engine and repairing measures
  轮主机第四缸活塞裙脱落事故的原因分析及修复措施
• The paper mainly introduces the calculating equation for piston skirt molded lines , the drawing of piston , and the design for convexity mother plate molded lines
  摘要重点介绍了计算活塞裙部型线方程，给出了从图纸到中凸靠模板曲线板型线设计的方法。
• Although some parts - such as skirts or grilles - are manufactured in polyamide , this polymer has not yet reached the status of a material used for bodywork parts , except when allied with other polymers
  尽管诸如活塞裙，格栅等一些部件已经是用聚酰胺材料生产，但这种聚合物仍然不能作为汽车车身部件的材料，除非将它与其他的聚合物结合。
• It directly affects the engine ' s working reliability whether it ' s good or not . according to the past method , piston can only be decided whether it meets the need of engineering in test after it has been turn out . this paper simulates the real working condition of piston by combining the ked method and fe - contact analysis way . it reflects deforming rule of piston , and makes it possible that the structure problem of piston skirt can only be found during the design period , so the cost of developing new product is lowered and the time is shorted . this paper proves that the thought is practical and the result of simulation to piston lr4100 is in accord with practice
  活塞裙部形线是活塞的关键结构之一，它的好坏直接影响发动机工作可靠性，以往的判定方法只有在活塞加工完成后，才能通过实验方法判定设计，能否满足工程实际的需要，本文通过ked方法与有限元接触方法的结合，模拟实际活塞工作情况，较为准确的反映出，活塞裙部的变形规律，在设计阶段发现活塞裙部的设计结构问题，节省新产品开发成本，缩短开发周期。

• 活塞裙的日语：ピストンスカート