测压试验的英文

• manometric test

• "测压"英文翻译    manometry
• "试验"英文翻译    experiment; test; trial
• "压颈测压试验" 英文翻译 :    pressure measurement by compression of neck
• "压试验" 英文翻译 :    high potential test; high voltage test
• "旁压试验；横压试验" 英文翻译 :    pressuremeter test
• "水压试验液压试验" 英文翻译 :    hydraulicefficiency pressure test
• "凹压试验" 英文翻译 :    cupping test
• "背压试验" 英文翻译 :    back pressure test
• "泵压试验" 英文翻译 :    pumping test
• "变压试验槽" 英文翻译 :    variable-atmosphere tank
• "侧压试验" 英文翻译 :    lateral compression test
• "超压试验" 英文翻译 :    overvoltage test
• "尺压试验" 英文翻译 :    ruler pressing test
• "冲荤压试验" 英文翻译 :    impulse voltage test
• "冲压试验" 英文翻译 :    impact compre ion test; percussion test; punch test; punching test
• "储压试验" 英文翻译 :    accumulation test
• "纯内压试验" 英文翻译 :    pure-internal pressure test
• "打压试验" 英文翻译 :    bulge test
• "低气压试验" 英文翻译 :    altitude test
• "低压试验" 英文翻译 :    low pressure test; low-pressure test
• "低压试验弹" 英文翻译 :    low pressure test cartridge
• "低压试验室" 英文翻译 :    altitude chamber
• "电压试验器" 英文翻译 :    potential tester
• "锻压试验" 英文翻译 :    forging test
• "反加压试验" 英文翻译 :    back pressurizing testing

• An experimental investigation for the wind pressure distribution on a large span awning
  大跨雨棚风洞测压试验研究
• The dynamic pressure measure technology on the building ’ s surface can get rather exact wind load distribution of buildings , can use in the design of buildings structure and glass cladding
  其中的建筑物表面动态测压试验技术能够得到较为准确的建筑物表面风压分布,可以用于建筑结构及玻璃幕墙设计。
• The analysis of the repeated test data shows the maximum deviation of air drag coefficient is less than 0 . 88 % and the deviation of the most surface pressure data is within 1 % , it illustrates the test data is reliable
  重复试验的数据分析表明，空气阻力系数数据的最大偏差小于0 . 88 ，绝大部分测压试验数据的偏差均在1以内，这说明客车模型风洞试验数据的精度较高。
• In this paper i was in virtue of the fluent software , set up the geometrical model of jin ’ ao mansion and adjacent buildings , used non - equilibrium wall functions to deal with the problem which come from the near wall , used realizable k - turbulent model to simulate the steady flow around 3d high - rise buildings , we can get the distribution of mean wind pressure coefficient of the surface of jin ’ ao mansion and five aerodynamics components . they were compared with the data from the wind tunnel test , we found out the distance between the result of the wind tunnel test and numerical simulation in the acceptable range
  本文以fluent软件为平台,建立金奥大厦及其周边建筑的计算几何模型,近壁区采用非平衡壁面函数法处理,运用基于雷诺时均的realizablek -湍流模型进行高层建筑三维定常风场数值模拟,获得金奥大厦表面时均风压系数分布及基底五分量气动力,并和风洞测压试验的结果及风压系数积分计算的基底五分量气动力相比较,发现两者之间的差异在可接受的范围之内。
• Designed a program which can use the mean pressure coefficient of jin ’ ao mansion to calculate mean wind load of the whole buildings and local floor . the integral result can apply into the practical design of construction , also can compare with the results of wind tunnel balance test to validate the veracity of this test
  通过自编的程序对金奥大厦表面时均风压系数进行积分计算获得其整体和局部楼层的平均风荷载,积分计算的结果一方面可以方便地运用于实际的建筑结构设计中,另一方面可以与风洞天平测力结果进行比较验证动态测压试验的正确性。