液体丁腈橡胶的英文

• liquid acrylonitrile butadiene rubber
• lnbr

• "液体"英文翻译    liquid; liquor; fluid
• "丁腈橡胶" 英文翻译 :    acrylonitrile botadienl iubber; acrylonitrile butadiene ru er; acrylonitrile butadiene rubber; acrylonitrile□butadiene ru er; buna n; butadiene acrylonitrile rubber; butadiene nitrile rubber; butadiene-acrylonitrile rubber, nitrile rubber; butakon; butaprene; butyronitrile rubber; chemigum; divinyl-nitrile rubber; gra; grn; n-type rubber; nitrile butadiene rubber；nbr; nitrile-butadiene ru er; nitrile-butadiene rubber; perbunan ru er; perbunan rubber
• "铝-丁腈橡胶" 英文翻译 :    aluminate-nitrile rubber
• "布纳n,丁腈橡胶" 英文翻译 :    buna n
• "丁腈橡胶商名" 英文翻译 :    paracril; perbunan
• "丁腈橡胶商品" 英文翻译 :    ckh
• "粉末丁腈橡胶" 英文翻译 :    pnbr
• "氢化丁腈橡胶" 英文翻译 :    hydrogenated butadiene-acrylonitrile rubber; hydrogenated nitrile-butadiene rubber
• "羧基丁腈橡胶" 英文翻译 :    carboxy nitrile rubber; carboxy terminated nitrile rubber; carboxyl nitrile rubber; carboxylated acrylonitrile butadiene rubber; carboxylated nitrile rubber; carboxylic nbr; carboxylic-acrylonitrile-butadiene rubber
• "丁腈橡胶胶粘剂" 英文翻译 :    nitrile rubber adhesive
• "丁腈橡胶改性酚醛压塑粉" 英文翻译 :    nbr modified phenolic molding compound; r modified phenolic molding compound
• "丁腈橡胶类热塑性弹性体" 英文翻译 :    tp-nbr thermoplastic elastomer-based on nbr
• "羧基丁腈液体橡胶" 英文翻译 :    htbm
• "腈橡胶" 英文翻译 :    nitrile ru er; nitrile rubber; nitrite rubber
• "酚醛树脂-丁腈橡胶膜状粘合剂" 英文翻译 :    narmtape
• "炭黑在丁腈橡胶中配方及鉴定方法" 英文翻译 :    carbon black in nbr recipe and evaluation methodod
• "丙烯腈橡胶" 英文翻译 :    acryl-nitrile ru er; acryl-nitrile rubber; acrylic-nitrile ru er; acrylic-nitrile rubber
• "氯腈橡胶" 英文翻译 :    acrylonitrile-chloroprene rubber; chloroprene acrylonitrile rubber
• "异戊腈橡胶" 英文翻译 :    acrylonitrile-isoprene rubber
• "腈橡胶圈" 英文翻译 :    nitrile rubber ring
• "腈橡胶纤维" 英文翻译 :    nitrile rubber fiber
• "丁腈苯橡胶" 英文翻译 :    acrylonitrile-butadiene-styrene rubber
• "二烯 丙烯腈橡胶" 英文翻译 :    butadiene acrylonitrile rubber
• "半导体丁基橡胶带" 英文翻译 :    semi-conducting butyl tape
• "丁二烯-丙烯腈橡胶" 英文翻译 :    hycar

• Filling flexibilizer , such as epoxy terminal block , polyurethane ether structure , thiokol and liquid ctbn to the system of expoxy - mannich amide , through the test on shear strength , bounding elasticity modulus and break strength of cured products , the different fuction could be found using different flexibilizers
  摘要在环氧酚醛胺体系中使用端环氧基聚氨酯醚、聚硫橡胶、液体丁腈橡胶等活性增韧剂，通过对固化物剪切强度、弯曲弹性模量及断裂强度的测试对比，可以看出不同增韧剂效果不同。
• When change the component of adhesive its shear strength increased from 39 . 3 mpa to 53 . 5 mpa at room temperature and it have long - term usage at 180 with 25 mpa and can be served at 230 in short period . the addition of liquid rubber resulted in a 300 % increase in the peeling strength . the addition of polymer ether imide led to a 260 % increase in the peeling strength , a 15 % increase in shear strength and a 10 increase in tg ( tg = 195 . 54 )
  研究结果表明： bmi dds e ? 51 tde ? 85组成的胶粘剂体系的室温剪切强度为39 . 3mpa ，当改变环氧树脂的含量时，剪切强度提高到53 . 5mpa ；用无规羧基液体丁腈橡胶改性环氧树脂胶粘剂时室温剥离强度提高3 . 0倍；用聚醚酰亚胺改性环氧树脂胶粘剂，室温剪切强度最高可达45 . 2mpa ，剥离强度提高2 . 6倍，玻璃化转变温度tg = 195 . 54 ，比未增韧体系提高10以上；碳纤维耐磨材料与同步器圆锥环的粘接实验结果表明，胶粘剂的使用工艺性能良好，满足室温剪切强度30mpa和180剪切强度12 . 5mpa的技术要求。
• An excellent adhesive was prepared from bismaleimide ( bmi ) , epoxy resin ( e - 51 and tde - 85 ) , 4 , 4 ' - diaminodiphenyl sulfone ( dds ) in this thesis . the influence of liquid rubber and polymer ether imide ( pei ) on the properties ( especially high - temperature strength and the peeling strength ) were discussed , their different toughening characteristics and mechanisms were discussed . last , the process and effection of heat - resisted structural adhesive were studied by adhesive experiment of synchronizer in automobile . the results of investigation made clear : the adhesive , has good properties , especially heat - resisted properity
  根据材料分子设计的原理，研究了二苯甲烷双马来酰亚胺( bmi ) 4 ， 4 ’ ?二胺基二苯基砜( dds ) e ? 51 tde ? 85组成的环氧胶粘剂体系，研究该体系在作为高温结构胶粘剂使用时的粘接性能；然后研究了用无规羧基液体丁腈橡胶( ctbn ? x )和聚醚酰亚胺( pei )分别来增韧该体系的增韧效果；最后通过碳纤维耐磨材料与同步器圆锥环的粘接实验，研究了耐高温结构胶粘剂的粘接工艺和使用效果。