湿容量的英文

• wet compacted weight
• wet unit weight
• wet volume capacity

• "湿"英文翻译    wet; damp; humid
• "容量"英文翻译    volume; capacitance; capacit ...
• "恩思林氏(粘土吸湿容量测定)仪" 英文翻译 :    enslin apparatus
• "湿容比" 英文翻译 :    wetted surface-volume ratio
• "湿容积" 英文翻译 :    humid volume
• "湿容重" 英文翻译 :    wet compacted weight; wet density; wet unit weight
• "容量" 英文翻译 :    volume; capacitance; capacity; capability; tankage; cubic measure; blast; bind; bend; measurement
• "泵容量" 英文翻译 :    pumcapacity
• "比容量" 英文翻译 :    specific capacity; specific storage; volume， specific
• "边容量" 英文翻译 :    edge capacity
• "变容量" 英文翻译 :    varying capacity
• "舱容量" 英文翻译 :    hold capacity
• "槽容量" 英文翻译 :    tank capacity; tankage
• "超容量" 英文翻译 :    exceed capacity; over capacity
• "池容量" 英文翻译 :    tankage
• "大容量" 英文翻译 :    high-capacity
• "低容量" 英文翻译 :    lv
• "电容量" 英文翻译 :    capacitance; electric capacity
• "斗容量" 英文翻译 :    bucket capacity; dipper capacity
• "端容量" 英文翻译 :    corresponding terminal capacity
• "阀容量" 英文翻译 :    valve capacity
• "肺容量" 英文翻译 :    capacity of lung; lung capacity; lung volume; pulmonary capacities
• "峰容量" 英文翻译 :    peak capacity
• "干容量" 英文翻译 :    dry capacity; dry unit weight
• "高容量" 英文翻译 :    high power capacity

• Test method for measuring maximum functional wet volume of utility vacuum cleaners
  测量通用真空吸尘器的最大功能性湿容量的试验方法
• In this paper , we aim at establish heat and mass coupled transfer model in the building wall , , the emphasis of this study lies in creating a coupled and non - linear diferential equation system for the heat air and moisture transfer in the wall , which can be described by means of continuum mechanics and irreversible thermodynamics , the most dominant factor is moisture conten 9la gas pressure pc and temperature t , for the description of heatair and moisture transport , the general mass balance equation can be expressed by the temporal change of moisture conten 9 l , gas pressure pc and temperature t that means , in order to create a closed solvable equation system , the other additional dependencies have to be found , which the other variable depending on the variables of the solution : moisture conten 6 l gas pressure pc and temperature to the model is verified by the numerical simulation software which has been developed about building wall . ,
  根据节能设计要求，本文用热力学的方法，并根据多孔介质中多相流体流动描述方面的最新研究成果? ?体积平均方程，建立了墙体热、湿和空气耦合热质传递模型，并推导出热、湿和空气耦合传递等效扩散方程；找到建筑墙体热、湿及空气耦合作用下热质传递过程的主要影响因素湿容量_ l 、气压p _ c和温度t 。开发了单体材料墙体热质传递数值模拟软件，用实测数据对软件进行调试并对模拟计算结果进行了验证。模拟出了单材料墙体在热、湿和空气耦合作用下建筑墙体内的温度和湿度分布规律。
• 3 . based on theoretical analysis and experimental results , the high relative humidity was diffcult to maintain in the closed tissue culture system when all of the fluorescent lamps were turn on , because of deficiency of the humidifier ' s capacity and air ventilation by top air nozzle outlets and return air in the bottom . 4
  根据对加湿过程的理论计算与试验分析，指出本系统中降温与加湿共存阶段加湿效果不明显，同时由于加湿器的加湿容量不足，顶部送风和下部两侧回风的通风方式造成了室内的相对湿度无法在荧光灯全开时达到控制要求。