热裂纹的英文

发音:

"热裂纹"怎么读用"热裂纹"造句

英文翻译手机版

fire check
heat checking
heat cracking
heating crack
hot cracking
hot fi ure
thermal crack

"裂纹"英文翻译 crack; fissures
"热裂纹试验" 英文翻译 : hot crack test
"再热裂纹" 英文翻译 : reheat crack; stress relief crack
"分块形槽热裂纹试验" 英文翻译 : segmented circular groove cracking test
"缪雷克期热裂纹试验" 英文翻译 : murex hot cracking test
"缪雷克斯热裂纹试验" 英文翻译 : murex hot cracking test
"热裂" 英文翻译 : heat check(ing); heat crack; hot tear(ing)
"裂纹" 英文翻译 : flaw; fissure; chine; gash; [房] craze; crazing; crackle (on pottery, porcelain, etc.) 这只碗上有条裂纹。 the bowl has a crack in it.; 裂纹检测 crack detection; 裂纹探测仪 [冶金学] crack detector; 裂纹涂料 crackle coating
"磨热裂" 英文翻译 : grinding checks
"热裂(铸疵)" 英文翻译 : hot crack
"热裂变" 英文翻译 : thermal fission◇热裂变因子 thermal fission factor
"热裂法" 英文翻译 : cracking process
"热裂缝" 英文翻译 : thermal crack
"热裂化" 英文翻译 : thermal cracking
"热裂解" 英文翻译 : thermal cracking
"热裂炼" 英文翻译 : thermal cracking
"热裂气" 英文翻译 : cracking gas
"热裂隙" 英文翻译 : temperature fracture
"闪热裂" 英文翻译 : flash pyrolysis
"缩裂，热裂。" 英文翻译 : hot tear
"裂纹龟裂纹" 英文翻译 : kaurigum
"超热裂变" 英文翻译 : epithermal fission
"催化热裂" 英文翻译 : catalytic cracking
"地热裂缝" 英文翻译 : geothermal crevice
"高温热裂解" 英文翻译 : high temperature pyrolysis

例句与用法

Simulation and analysis of the method of reducing thermal crack at the edge of piston with toroidal combustion chamber
收口型燃烧室边缘热裂纹缓解措施的研究
Abstract : in the paper , the hot crack for the forging die made by methodsof squeeze casting is analyzed , how to reduce the hot crack is also given out
文摘:从生产实际出发，分析了锻模液态模锻成形过程中热裂纹形成的主要原因，提出了降低锻模热裂纹的几点措施。
Destructive tests on welds in metallic materials - hot cracking tests for weldments - arc welding processes - part 3 : externally loaded test iso tr 17641 - 3 : 2004 ; german translation of cen iso tr 17641 - 3 : 2004
金属材料焊接的有损检验.焊件的热裂纹试验.弧焊过程
On the basis of the experiment , the reason that high strength 7a52 aluminum alloy produced the familiar defects such as hot cracking , porosity , slag patch , etc . in the welding was analyzed , and the preventive measures of every defect were adopted
摘要在实验的基础上分析了高强7a52铝合金焊接时出现的常见焊接缺陷：热裂纹、气孔、夹渣等产生的原因，并对每种缺陷提出了预防措施。
It has been pointed out that for the application of cryogenic nitrogen gas jet in high speed milling of titanium alloy , unless the chipping and fracture caused by thermal cracks take place , the reduced temperature of cryogenic nitrogen gas will prolong the tool life
指出在低温氮气射流条件下高速铣削钛合金时，只要热裂纹的形成与扩展未引起刀具的崩刃及刀面的剥落，进一步降低低温氮气的温度将提高刀具的使用寿命。
Based on the mechanism of hot cracking formation of castings , the cracking defects of furnace door frame castings was analyzed , and found that the main reasons causing cracking are as follows : construction of the casting was not reasonable , gating system was not proper , and pouring temperature was too high
摘要根据铸件产生热裂纹的机理，对炉门框裂纹缺陷进行分析，找到了裂纹产生的主要原因是铸件结构和浇注系统不合理，以及浇注温度过高。