燃气射流的英文

• hot jet

• "燃气"英文翻译    gas
• "射流"英文翻译    jet-flow; vein; jet; filamen ...
• "充气射流" 英文翻译 :    aeration jet
• "抽气射流" 英文翻译 :    air removal jet
• "含气射流" 英文翻译 :    aeration jet
• "空气射流" 英文翻译 :    air jet; air-spray; jet airstream
• "冷空气射流" 英文翻译 :    chilled air jet
• "冷气射流" 英文翻译 :    cold gas jet; cold-gas jet
• "排气射流" 英文翻译 :    exhaust jet stream
• "气流；空气射流" 英文翻译 :    airstream
• "蒸气射流" 英文翻译 :    vapor jet
• "空气射流速度" 英文翻译 :    air jet velocity
• "压缩空气射流" 英文翻译 :    compressed-air jet
• "空气喷射空气射流" 英文翻译 :    aerojet
• "空气射流空气喷口" 英文翻译 :    air jet
• "空气喷口空气射流喷气器" 英文翻译 :    air jet
• "射流" 英文翻译 :    jet-flow; vein; [物理学] jet; filament band; shooting flow; fluidic; jet current; jet stream; efflux◇射流泵 jet injector; 射流传感器 fluidic sensor; 射流电路 fluidics circuit; 射流管 jet pipe; 射流技术 fluidics; fluidonics; fluerics; 射流喷口 efflux nozzle; 射流速度 efflux velocity; 射流系数 efflux coefficient; 射流装置 fluidic device; fluidizing system
• "燃气" 英文翻译 :    gas◇燃气发电厂 gas power plant; 燃气锅炉 gas fired-boiler
• "空气射丛" 英文翻译 :    air shower
• "煤气射入" 英文翻译 :    gas injection
• "回旋加速气射" 英文翻译 :    cyclotron radiation
• "同步加速气射" 英文翻译 :    synchrotron radiation
• "吹气射出成型机" 英文翻译 :    air blowing injection molding machine
• "电子感应加速气射" 英文翻译 :    betatron radiation
• "相干同步加速气射" 英文翻译 :    coherent sychrotron radiation; coherent synchrotron radiation

• Numerical study on gas - solid two - phase jet flow and solid particle erosion
  燃气射流气固两相数值模拟与颗粒冲刷分析
• The simulation results were studied the interaction mechanisms among burning jet flow and upstream flow were demonstrated
  分析和比较了模拟结果，揭示了空气来流和燃气射流对弹箭的干扰机理。
• While the speed is very large , the fuel - air mixing behind the airstream is decreased and the span that the fuel flow in the second combustor is reduced , so the combustion efficiency is decreased , h ) if the fuel streams impinge with the airstreams directly at the air - inlet exit , it make against increasing the combustion efficiency , i ) increasing air - to - fuel ratio within proper range can increase the combustion efficiency
  增加燃气喷射速度有利于增强回流区强度，头部燃烧温度上升，但速度太大则会减弱燃气同空气在进气道下游的掺混燃烧，减少燃气在室内停留时间，燃烧效率降低； 8燃气射流与空气流在进气道出口直接撞击不利于燃烧效率的提高； 9在适当范围内增大空燃比能显著提高燃烧效率。