玻璃化温度的英文

• glass state temperature
• glass temperature
• glass transition temperature

• "玻璃"英文翻译    glass
• "化"英文翻译    change; turn; transform
• "温度"英文翻译    temperature
• "玻璃化温度范围" 英文翻译 :    glass transition temperature range
• "玻璃化温度以下的退火效应" 英文翻译 :    sub-tgannealing
• "玻璃软化温度" 英文翻译 :    glass transition temperature
• "玻璃态化温度" 英文翻译 :    glass temperature; glass transition temperature
• "玻璃转化温度" 英文翻译 :    glass transition temperature
• "玻璃化转变温度" 英文翻译 :    glass transition temperature; glass-transition temperature
• "玻璃熔化温度制度" 英文翻译 :    temperature program for glass-melting
• "玻璃态转化温度" 英文翻译 :    glass transition temperature tg
• "玻璃化" 英文翻译 :    virtrification; vitrifacation =vitrification; vitrifaction; vitrifying
• "半玻璃化" 英文翻译 :    semivitreous
• "半玻璃化的" 英文翻译 :    semivitreous
• "玻璃化的" 英文翻译 :    vitrified
• "玻璃化点" 英文翻译 :    glass point; glass transition point
• "玻璃化矿渣" 英文翻译 :    vitrified slag
• "玻璃化湿度" 英文翻译 :    glass transition temperature
• "玻璃化速度" 英文翻译 :    rate of vitrification
• "玻璃化炭黑" 英文翻译 :    glassy carbon black; glassy carbonblack
• "玻璃化物" 英文翻译 :    vitrification
• "玻璃化砖" 英文翻译 :    vitrified brick
• "玻璃化转变" 英文翻译 :    glass transition
• "玻璃化转谈" 英文翻译 :    glass transition
• "玻璃化作用" 英文翻译 :    vitrifaction; vitrification

• Homogeneous bridging groups always raise the glass temperature .
  同类桥联基因总是提高玻璃化温度。
• Heterogeneous bridging groups can raise the glass temperature according to their chemical composition .
  不同类桥联基团根据它们的化学组成能提高玻璃化温度。
• The result showed that when the temperature 0 ~ - 15 , dosage of emulsifier 6 % , the properties of the prepared pigment printing binder can reach or exceed the ordinary pigment printing binder
  研究表明，玻璃化温度为0 ~ - 15 ，乳化剂质量分数为6 % ，所合成的环保型粘合剂的各项性能都达到或超过了普通的非环保粘合剂。
• It was investigated that how content and dispersion of different pigment , degree of curing and glass transference temperature of coating affect pigment resistance transference of uv curing optical fiber coding inks
  研究了颜料的自身性能如种类、含量和分散状态，涂膜的物理性能如固化度和玻璃化温度对颜料耐迁移性的影响。
• Pes is a good membrane materials which possess excellent properties , such as high mechanical strength , good chemical stability and resistance to heat , pressure and erosion , its temperature of glass transition is 225
  聚醚砜( pes )是一种综合性能优良的聚合物膜材料，其玻璃化温度高达225 ，具有较高的拉伸强度和优良的化学稳定性、耐热性、耐压力，耐腐蚀等性能。
• A comprehensive research was conducting on the relations among its solidified behavior , vitrification point , adhesive power , impact strength and peel strength . the best solidification conditions of conducting electrostatic coating was established .
  研究了导电涂层固化行为与玻璃化温度、附着力、冲击强度和剥离强度之间的关系,确立了导电涂料的最佳固化条件。
• By reducing bromine content and adding aluminum hydroxide in the surface of substrate for the printed circuit board , comparative tracking index ( cti ) of the substrate is improved significantly , meanwhile the size stability , heat resistance , the glass transition temperature of the substrate are improved too
  摘要通过降低印制电路板的基板表层的嗅含量并加入氢氧化铝，显著提高了基板的相比漏电起痕指数( cti ) ，并同时提高了基板的尺寸稳定性、耐热性、玻璃化温度。
• The polymer of p - tert - butylstyrene ( tbs ) has a relative high glass transition temperature and is soluble in aliphatic solvent . it has a comprising prospect of application in many areas including the development of novel materials , theoretical research , dispersion polymerization , unpolluted paints , oil additives , and so on
  对叔丁基苯乙烯聚合物具有较高的玻璃化温度，并且能溶于脂肪烃中，使其在新型材料的开发、理论研究、分散聚合、环保油漆和油品添加剂等领域有广阔的应用前景。
• In the volume change study , we found appropriate temperature is helpful for shrinkage control , and different lpas have different shrinkage control effects due to their dipole moment , tg , miscibility with upr and morphology after blending . there existed an optimal concentration range of poly ( vinyl acetate ) based lpas for shrinkage control . lpa was effective for shrinkage compensation in this range , on the other hand , lpa only acted as filler and the low profile effect vanished out of this range , however , for polystyrene based lpa , the more concentration the better shrinkage control
  在膨胀研究中，发现适当的温度条件更有利于upr达到好的收缩控制效果；不同类型的lpa随着偶极矩、玻璃化温度、与upr的相容性、与upr的混合形态的不同，表现出不同的收缩控制效果；聚醋酸乙烯酯类的lpa - a存在一个最佳收缩控制的浓度范围，在这个范围之内， lpa起到补偿收缩的作用；而在这个范围之外， lpa的作用仅相当于填料，不能起到收缩控制。
• The results indicated : the mechanical properties of pu prepared by added eg in a two - step process in prepolymerization technology were better than that of one - step process , its tg shifted 6 towards high temperatures ; the tan peak of pu material at low temperature disappeared through decompress boiling distilling technology
  结果表明，采用预聚体工艺并且分步加入eg所制备的聚氨酯弹性体具有较好的力学性能，玻璃化温度向高温方向偏移了6 ；采用减压共沸蒸馏工艺制备的聚氨酯材料在低温区的tan峰消失。

• 玻璃化温度的日语：ガラス温度 なんかてん ガラスおんど