球面反射的英文

• spheric reflection

• "球面"英文翻译    spherical surface; sphere
• "反射"英文翻译    reflect
• "球面反射镜" 英文翻译 :    spherical reflecting mirror; spherical reflector
• "球面反射器" 英文翻译 :    spheric reflector; spherical reflector
• "凹球面反射镜" 英文翻译 :    concave spherical mirror
• "半球面反射器" 英文翻译 :    hemispheric reflector
• "单球面反射镜" 英文翻译 :    single spherical mirror
• "非球面反射镜" 英文翻译 :    aspheric mirror; aspheric reflector; aspheric-mirror; aspherical mirror
• "非球面反射面" 英文翻译 :    aspheric reflecting surface
• "球面反射镜腔" 英文翻译 :    curved-mirror cavity
• "球面反射系统" 英文翻译 :    spherical reflecting system
• "共焦球面反射器" 英文翻译 :    confocal spherical reflector
• "离轴球面反射镜" 英文翻译 :    off-axis spherical mirror
• "球面反射器天线" 英文翻译 :    spherical reflector antenna
• "球面反射式物镜" 英文翻译 :    spherical mirror objective
• "球面反射体天线" 英文翻译 :    spherical reflector antenna
• "深凹球面反射镜" 英文翻译 :    deep spherical mirror
• "小型球面反射镜" 英文翻译 :    mirror ball
• "球面反照率" 英文翻译 :    bond's albedo; spherical albedo
• "镜面反射（高光）镜面反射" 英文翻译 :    specular reflection
• "凹面反射器" 英文翻译 :    concave reflector
• "背面反射" 英文翻译 :    back reflection x-ray camera; back-reflection x-ray exami
• "背面反射图" 英文翻译 :    reflected rear view
• "表面反射" 英文翻译 :    surface reflectance; surface reflection; surface reverberation
• "表面反射波" 英文翻译 :    surface echo

• The degree of levitation force enhancement by this means can also be facilitated by enlarging rb and employing lower resonant mode
  在这三类反射端中，采用球面反射端通过上述方式提高悬浮力，可以获得最好的效果。
• The machining approach is verified to be simple and reliable by computer simulation , so the production efficiency can be improved and the equipment input can be reduced
  通过计算机模拟验证了该加工方法的简便与可靠性，可以降低非球面反射镜加工的设备投入，提高生产效率。
• Several test results of other , nff - axis aspheric mirrors are also given . all of the mirrors have accuracy better than 1 / 40x , and have fulfilled the demands by designer
  实践证明，本文的研究适用于大口径离轴非球面反射镜的加工，有效地提高了非球面的加工效率和精度水平。
• " the project aims to build a fixed spherical reflective antenna of 500 metres aperture at a bowl - shaped valley of some 500 metres wide in a mountainous area in guizhou and this reflective antenna will be named as " soft antenna "
  。这研究项目计划在贵州山区中的一个开口500多米的碗状山谷中，依附地形建造一口径为500米的球面反射面固定天线，名为柔性的天线。
• In the srlois , a sphere reflector taking the place of the traditional lens is taken as the scanning optical system , the measuring range of the system is extended , and the problem of laser non - contqct measurement of larger diameter for workpiece
  本系统用球面反射镜代替传统透镜作为扫描光学系统，扩大了系统的测量范围，解决了工件较大径向尺寸(直径)的激光非接触检测问题。
• On the basic of analysizing , the general methods for measuring larger size of workpiece , a new tape laser - scanned on - line inspecting system based on the principle of lois - a sphere reflect laser - scanned on - line inspecting systems , ( srlois ) is presented in this paper
  本文基于透射式激光扫描检测原理，在分析测量工件较大尺寸的一般方法基础上，提出一种新型的激光扫描检测系统? ?球面反射式激光扫描在线检测系统。
• This dissertation presents improved methods for both testing results analysis and aspheric mirrors fabrication concerning computer controlled optical surfacing ( ccos ) technology to improve its efficiency and accuracy . a new ccos model based on " relative tool path " is proposed , and a method is developed to solve and evaluate fabricating parameters
  目前ccos ( computercontrolledopticalsurfacing )技术被广泛用于离轴非球面反射镜的制造，本文针对该技术中涉及到的一些问题开展较为深入的研究，以进一步提高离轴非球面的加工效率和精度。
• In this paper , we brought forward an innovative idea : according to the characteristics of easy deformation of ultra - thin mirror , we employ a sphere mirror , which is easier to fabricate and test , to replace the aspherical mirror , then the sphere mirror is deformed into an aspherical one by active optics technology . on this purpose , we need to study the mechanism and method of shaping a spherical mirror into an aspherical one
  由于非球面镜的加工和检测都比较困难,因此本文提出了一个大胆的设想:利用超薄镜易于变形的特点,以加工和检测难度远低于非球面的球面来代替非球面,运用镜面的主动控制技术将球面反射镜变形成所需精度的非球面反射镜。
• The optical manufacturing for off - axis aspheric mirrors has become increasingly challenging for two reasons . the mirrors , in addition to being larger , are more aspheric and off - axis in order to meet the requirement of next generation space camera , which is commonly configured as three - mirror - anastigmat ( tma ) to get both wide fov and high resolution , and the required accuracy is more stringent
  近年来，人们提出了“离轴三反消像散” ( tma )结构来满足下一代空间相机“详查”和“宽覆盖”的技术要求，该结构中要求使用三块离轴非球面反射镜，而大口径、高精度离轴非球面反射镜的制造技术是研制tma结构空间相机的主要技术瓶颈之一。
• Asm 1 . 0 contains the entire ccos process , including best - fit sphere calculating , profiler test and anslysis , virtual grinding and polishing , cnc grinding and polishing , etc . as results , the manufacturing process of a f / 1 . 17 , 770mm x 200mm rectangular even high order off - axis aspheric mirror is presented as an example in detail
  最后，比较详细地介绍了770mm 200mm ， f 1 . 17高次离轴非球面反射镜的加工、检验过程，加工后200mm口径范围内加工精度达到0 . 013 rms ，完全满足了设计要求。