相对弯曲半径的英文

• relative bending radius

• "相对"英文翻译    opposite; face to face
• "弯曲"英文翻译    winding; meandering; zigzag; ...
• "半径"英文翻译    radius
• "弯曲半径" 英文翻译 :    bend radius; bending radius; beveling radius; bevelling radius; radius of bend
• "电缆弯曲半径" 英文翻译 :    cable bend radius; radius of cable bends
• "光纤弯曲半径" 英文翻译 :    fiber bend radius
• "卷边弯曲半径" 英文翻译 :    flanging radius
• "允许弯曲半径" 英文翻译 :    allowable bending radius
• "最佳弯曲半径" 英文翻译 :    optimum bend radius
• "最小弯曲半径" 英文翻译 :    minimum bend radius; minimum bending radius
• "大弯曲半径弯管" 英文翻译 :    long radius elbow; long turn elbow
• "曲半径" 英文翻译 :    bilge radius
• "卷曲半径" 英文翻译 :    crimp radius
• "挠曲半径" 英文翻译 :    bending radius
• "扭曲半径" 英文翻译 :    warheight
• "有效卷曲半径" 英文翻译 :    effective crimping radius
• "最小挠曲半径" 英文翻译 :    minimum bending radius
• "相对半径" 英文翻译 :    relative radius
• "弯曲圆柱半径" 英文翻译 :    radius of bending cylinders
• "相对曲率半径" 英文翻译 :    relative radius of curvature
• "比活塞半径, 相对活塞半径" 英文翻译 :    relative plug radius
• "过渡区半径相对" 英文翻译 :    knuckle radius
• "一对弯刀" 英文翻译 :    pair of scimitars
• "曲半岛" 英文翻译 :    thy
• "半径" 英文翻译 :    [数学] radius; [天文学] semidiameter◇半径规 [机械工程] radius gauge; 半径铣刀 [机械工程] radius cutter

• Relative bending radius
  相对弯曲半径
• Its reliability has been tested though examining . the influence laws of mould structure , including wiper die and the style , size and installed position of mandrel , have been studied . combined with the theoretical analysis of perfect pure bending , the tendency of relative bending radius r / d and relative wall thickness t / d to one of the major quality target - the maximum wall thickness reduction ratio is also studied
  通过数值模拟研究获得了包括防皱块和芯棒形式、尺寸和安装位置在内的模具结构对制件成形质量的影响规律；结合对理想纯弯曲的理论分析，研究获得了相对弯曲半径r / d 、相对壁厚t / d对制件主要质量指标之一的最大壁厚减薄率的影响趋势和大小。
• Stretch - bending former is used to manufacture curved pieces with large size and high shaped precision . generally , these pieces are relatively large winding radius extrusion or sheet bending profiled bars . especially , stretch - bending former is the needed equipment to produce rims , ribs , edges and strips of airplanes
  拉弯机是生产加工飞机上的框肋缘条等型材零件的必须设备，常用于制造尺寸大、外形准确度要求较高、相对弯曲半径大的挤压和板弯型材弯曲件。