纯弯的英文

• simple bending

• "纯"英文翻译    pure; unmixed
• "弯"英文翻译    curved; bent; crooked; flexu ...
• "纯弯曲" 英文翻译 :    direct flexure; pure bending; pure flexure; simple bending
• "纯弯曲形式" 英文翻译 :    pure bending mode
• "单纯弯曲" 英文翻译 :    pure bending; simple bending
• "肋骨纯弯机" 英文翻译 :    frame pure-bending machine
• "纯弯曲疲劳试验机" 英文翻译 :    pure bending fatigue testing machine
• "纯外部燃烧" 英文翻译 :    all-external burning
• "纯陀" 英文翻译 :    cunda a native of kuinagara from whom ākyamuni accepted his last meal
• "纯臀先露, 伸腿臀先露" 英文翻译 :    frank breech presentation; single breech presentation
• "纯威士忌" 英文翻译 :    straight whiskey
• "纯臀先露" 英文翻译 :    frank breech presentation
• "纯威士忌酒" 英文翻译 :    straight whisky; whiskey neat; whiskey straight
• "纯推动力" 英文翻译 :    net impelling force

• Buckling of thin - walled members under pure compression and pure bending with shear effect
  纯压或纯弯薄壁杆件的稳定分析
• Application of fiber model method to concrete - filled rectangular steel tubes with pure bending
  纤维模型法在矩形钢管混凝土纯弯构件中的应用
• The bending fracture problems of cracked plate for anisotropic functionally graded materials under loads of pure bending , pure twisting or bending and twisting are discussed
  摘要探讨各向异性功能梯度材料裂纹板受纯弯、纯扭、弯扭载荷作用下的弯曲断裂问题。
• And with reinforced concrete finite element a simulation calculation method is founded for randomness of initial cracks within the equal stress zone of concrete members
  结合钢筋混凝土有限元，建立了混凝土构件等应力区初始裂缝随机性的仿真计算方法，对钢筋混凝土梁纯弯段的裂缝规律进行了仿真计算。
• The influences of hollow section ratio on the mechanism of cfdst beams , columns and beam - columns were analyzed . the influences of different loading paths on the bearing capacities of the cfdst beam - columns were also discussed
  分析了空心率对轴压、纯弯和压弯构件力学性能的影响,讨论了加载路径对压弯构件承载力的影响。
• The predicted load versus deformation relationship curves are in good agreement with those of tests . stress distributions of steel and concrete , interactions between steel and concrete and failure modes of inner and outer steel tubes were analyzed by finite element method
  在此基础上,用abaqus建模对轴压、纯弯和压弯构件受力全过程中内外钢管与混凝土的应力分布、三者之间的相互作用以及内外钢管的破坏形态进行了研究。
• Parametric analysis was performed on the influences of bearing capacities of the composite members by fiber element method . the selected parameters were hollow section ratio , steel ratio , strength of the materials , etc . simplified models were derived for the member capacities of the composite beam - columns
  用纤维模型法系统地分析了截面含钢率、空心率、钢材和混凝土强度等因素对构件承载力的影响,提出了轴压、纯弯和压弯构件承载力的实用计算方法。
• The main achievements were summarized in detail as follows : ( 1 ) the cfdst tubular beams , columns and beam - columns with chs outer steel tubes were tested systematically . the main experimental parameters were tube diameter - to - thickness ratio , hollow section ratio , eccentricity and slenderness ratio . ( 2 ) load - deformation relationship curves of cfdst subjected to compression and bending were analyzed by finite element method and fiber element method
  本文具体进行了以下几个方面的工作: ( 1 )分别以径厚比、空心率、长细比、偏心距等为主要变化参数,较系统地进行了轴压、纯弯和压弯构件在单调加载下的试验研究。
• The changes of characteristics of material and geometry caused by stamping all influence the precision of cae . in this thesis it also shows that a typical structure and a simplified car model were built using one step forming and mapping method based on vpg and kmas software , thus enabling us to define it fast fine simulation method ( ffs ) ; likewise , the pure static bend test and the front impact test complied with ecer42 were respectively completed
  4 .本文首次将快速精细仿真分析( fastfinesimulation - ffs )方法应用到车身典型结构件的静态纯弯特性研究,利用kmas软件进行了该仿真模型一步成型拉延分析,通过试验和仿真分析结果对比,验证了拉延工艺对车身结构件力学特性的重要影响。
• In the past , there were a large number of research studies on the behaviour of concrete - filled steel tubes ( cfst ) subjected to compression , bending or combined compression and bending , and there were a few research studies on the behaviour of cfst subjected to pure torsion , compression - torsion , bending - torsion , compression - bending - torsion and compression - bending - shearing . however , the behaviour of cfst members under complicated loading conditions still needs to be studied deeply
  以往,研究者对钢管混凝土构件在轴压、纯弯和压弯荷载作用下的性能进行了大量研究,对纯扭、压扭、弯扭、压弯扭及压弯剪受力状态下的工作性能也有一些研究报道,但研究工作,尤其对压弯扭剪构件的工作机理的研究仍有必要深入进行。