绳槽的英文

• grooving
• rope groove

• "绳"英文翻译    rope; cord; string
• "槽"英文翻译    trough; manger
• "缆绳槽" 英文翻译 :    rope chute
• "绳槽轮" 英文翻译 :    rope sheave
• "型绳槽" 英文翻译 :    u-groove u
• "u型绳槽" 英文翻译 :    u profile
• "半圆型绳槽" 英文翻译 :    semi-circular groove
• "半圆形绳槽" 英文翻译 :    round-seat groove
• "连接绳槽" 英文翻译 :    riser trousers
• "切口，根切（绳槽）" 英文翻译 :    undercut
• "切口型（绳槽）" 英文翻译 :    undercut profile
• "绳槽槽距" 英文翻译 :    groove pitch
• "绳槽滑轮" 英文翻译 :    rope sheaves
• "绳槽卷筒" 英文翻译 :    grooved drum
• "绳槽类型" 英文翻译 :    type of sheave groove
• "绳槽压力" 英文翻译 :    groove pressure
• "型切口（绳槽）" 英文翻译 :    undercut u-groove u
• "有槽绳槽" 英文翻译 :    groove sheave
• "绳操" 英文翻译 :    [体育] rope exercise
• "绳辫步" 英文翻译 :    plait
• "绳编针" 英文翻译 :    cable needle
• "绳编袋" 英文翻译 :    cord bag
• "绳边碗" 英文翻译 :    rope-edge bowl

• Check sheave rope pocket wear with a 1 3 8 1 1 32 template
  量规检查绳槽磨损的情况
• Casting sheaves for cranes . groove profiles
  起重机用铸造滑轮.绳槽断面
• This paper presents design thinking , operation and structure of a load self - locked brake type elevator which features endless stroke , single sheave and rope - groove friction
  摘要介绍1种直重机械中的无限行程单卷盘回转型绳槽耦合式负载自锁制动提升机的设计思想、工作原理和结构形式。
• And based on the consideration of the impacts of the drum end plate , surface rope slot and quality change of the wire ropes , the paper has deduced the theory calculation formula of the drum stability
  同时，基于该结论在综合考虑卷筒端板、表面绳槽和钢丝绳变质量等因素的影响，利用薄壳武汉理工大学博士学位论文力学推导出了卷筒稳定性理论计算公式。
• Based on synthesis analyzed cranes drums " strength , stability calculate theory and abundant test , the dissertation also predigest the consider method of rope slot protruding stiffened and present corresponding calculate chart , the dissertation also discussed the drumd " strength and the judgment method of destroy modal of drums " stability and brought forward new drums " design and calculate method . at last , the paper
  在综合分析起重机卷筒强度、稳定性计算理论并进行大量试验研究的基础上，对卷筒设计计算中绳槽凸筋的考虑方法进行了简化，给出了相应计算图表;对卷筒强度、稳定性破坏形式的判断方法也进行了讨论，提出了切合工程实际要求的实用化的卷筒设计计算方法。
• To meet this challenge , a research project was supported by ministry of communication and bv shanghai zhenhua port machinery co . . ltd . focusing on analysis of tdtcd ( traditional design theories of crane drums ) the paper has studied the impacts of features under the binding force of wire ropes , the end - plate and rope slot . this study is based not only on the thin shell theory and viscoelastic mechanics to calculate the strength and stability of drum , but also on an experiment with technology in " state of act "
  本文结合交通部重点科技项目“港口起重机钢丝绳传动件高性能技术研究”和上海振华港机股份有限公司委托项目“起重机焊接卷筒极限壁厚研究” ，针对起重机卷筒传统设计方法偏于保守的情况，以薄壳理论和近代力学为基础，以现代试验技术为研究手段，对钢丝绳紧箍力作用下的外载特性、端板、绳槽等因素对卷筒强度和稳定性的影响进行了系统的理论研究，在深入开展卷筒强度、稳定性和实验模态分析等试验的基础上，提出了有别于传统方法的卷筒强度、稳定性计算方法。