脱模剂的英文

发音:

"脱模剂"怎么读用"脱模剂"造句

英文翻译手机版

demoulding agent
form release agent
form release compound
form-release compound
formwork oil
mold discharging agent
mold dope
mold lubricant
mold parting agent
mold release agent
mold releasing agent
mold-release agent
mould discharging agent
mould dope
mould parting agent
mould release agent
mould releasing agent
mould-release agent
parting compound
parting medium
remover
separating compound
separating material
separator
stripping compound

"脱模"英文翻译 demould; drawing of patterns ...
"剂"英文翻译 a pharmaceutical or other ch ...
"脱模剂,离模剂" 英文翻译 : release agent, release sheets
"防粘剂；脱模剂" 英文翻译 : antisticking agent
"硅脱模剂" 英文翻译 : silicon mold release agent
"离型剂，脱模剂" 英文翻译 : mold releasing agent
"内含脱模剂" 英文翻译 : internal mold release; internal mould release; internal release agent
"内脱模剂" 英文翻译 : internal molding lubricant; internal releasing agent
"气喷脱模剂" 英文翻译 : aerosol release agent
"脱模剂；剥离剂" 英文翻译 : release agent
"脱模剂；隔离剂" 英文翻译 : parting agent
"脱模剂过量" 英文翻译 : excessive releasing agent
"外脱模剂" 英文翻译 : external mold lubricant; external mould lubricant; external releasing agent
"外用脱模剂" 英文翻译 : external mold release; external mould release
"除垢性脱模剂" 英文翻译 : detergent release
"非硅类脱模剂" 英文翻译 : non-silicone release
"热浸渍脱模剂" 英文翻译 : hot-dip striping compound
"脱模剂乳状液" 英文翻译 : release emulsion
"脱模剂压送机" 英文翻译 : die lube station
"主要的脱模剂" 英文翻译 : primary release agent
"剥色剂脱模剂反萃取剂" 英文翻译 : strippingagent
"喷用硅油脱模剂" 英文翻译 : aerosol silicone release agent
"食品烤盘脱模剂" 英文翻译 : demoulding agent for food baking dish
"脱模剂, 模润滑剂, 模型油" 英文翻译 : mold lubricant
"注塑成形润滑脱模剂" 英文翻译 : lubricant for drawing of patterns

例句与用法

The stickiness tends to disappear on standing .
搁置时脱模剂的粘性易于消失。
If the mold spray is sticky, reduce the silicate .
如果脱模剂发粘，则减少硅酸盐。
Cork mold spray solutions have a tendency to deteriorate or ferment .
软木粉脱模剂溶液易于变质或发酵。
In all the formulas for mold spray, a common ingredient is water .
在给出的所有脱模剂配方中，水是共用的拼料。
It is difficult to set down an exact formula because cork is a natural product .
要确定脱模剂的精确配方是困难的，因为软木是一种天然产物。
Some molders believe a mold spray is of no value until it has a real vile odor .
一些铸造工人认为，除非脱模剂发出十分令人作呕的气味，不然就毫无价值。
It is the usual custom for each battery manufacturer to make his own spray from materials obtained locally .
各蓄电池生产厂都习惯采用从当地获得的材料配制脱模剂。
Too much water reduces the adhesion and too little piles the material up too thick on the mold surface .
水太多会减少粘附力，加水太少则会使脱模剂在模具表面堆积太厚。
Experience will dictate how to vary the mold spray formula in accordance with casting results but do so very slowly .
根据铸造效果，可以凭经验改变脱模剂的配方，但这样很慢。
Mold spray life, with some of the formulas mentioned above, should be at least several hours with some touched up with the spray gun .
用上述配方配制的脱模剂，用喷枪喷涂，其有效期至少可达几小时。