行充的英文

• yukimitsu

• "行"英文翻译    go
• "充"英文翻译    sufficient; full; ample
• "航行充电" 英文翻译 :    charge on the voyage
• "进行充气" 英文翻译 :    inflate
• "旅行充电器" 英文翻译 :    lp-100w; sp11-90w
• "顺行充盈" 英文翻译 :    antegrade filling
• "自行充气" 英文翻译 :    self inflating; self-inflating
• "滑行充气不足" 英文翻译 :    under -inflation
• "末端回肠逆行充盈" 英文翻译 :    retrograde filling terminal ileum
• "下行充填假面顶" 英文翻译 :    stowing screen
• "一过性逆行充盈" 英文翻译 :    transient retrograde filling
• "在装卸时对材料进行充气" 英文翻译 :    aerating of material during loading or unloading
• "发行充满爆炸力与灵魂风味" 英文翻译 :    un-break my heart
• "密闭腔室可以进行充气控制" 英文翻译 :    gas tight chamber for atmospheric control
• "行筹" 英文翻译 :    to cast lots divine
• "行齿轮减速装置" 英文翻译 :    epicyclic reduction gear unit
• "行出较小的牌" 英文翻译 :    finesse
• "行迟" 英文翻译 :    retardation of walking
• "行触发电路" 英文翻译 :    line triggering circuit
• "行持" 英文翻译 :    yukimochi
• "行触发脉冲" 英文翻译 :    line triggering pulse
• "行程钻速" 英文翻译 :    drilling rate of a trip; roundtripenetration rate
• "行处" 英文翻译 :    gati-visaya
• "行程终止位置" 英文翻译 :    end-of-stroke position

• According to the experiment of influences of fiber structures and the width of edge channel on flow filling , it was found that even a small gap ( l or 2mm ) between the preform and the mold edge could also disrupt the flow pattern , which evidently changed the local permeability of preform . the filling process was simulated using the permeability for different edge width predicted by a . hammami or poiseuille model , which shown good agreement with the experiment results
  实验研究了纤维铺层结构及流道缝隙的宽度对充模流动的影响，发现在纤维预成型体和模具壁间存在的较小的缝隙也会对边缘的流动产生干扰，进而影响增强材料主体的渗透；对于不同的缝隙宽度，分别根据a . hammami模型和poiseuille模型预测边缘等效渗透率，并进行充模过程数值模拟，与实验结果吻合较好。