起始温度的英文

• initial temperature
• initiation temperature
• starting temperature
• temperature of phase change
• temperature of start

• "起始"英文翻译    origin; origination; parenta ...
• "温度"英文翻译    temperature
• "外推起始温度" 英文翻译 :    temperature of the extrapolated onset; temperature of the ocean
• "氧化起始温度" 英文翻译 :    oit = oxidative induction temperature
• "超始温度" 英文翻译 :    initial temperature
• "初始温度" 英文翻译 :    initial temperature
• "初始温度计" 英文翻译 :    primary thermometer
• "原始温度" 英文翻译 :    initial temperature; original temperature; palaeotemperature
• "终始温度" 英文翻译 :    terminal temperature
• "初始温度分布" 英文翻译 :    initial temperature distribution
• "分解开始温度" 英文翻译 :    kick-off temperature
• "岩体原始温度" 英文翻译 :    original rock temperature
• "原始温度梯度" 英文翻译 :    original temperature gradient
• "（鼓泡剂）分解开始温度；引发温度" 英文翻译 :    kick off temperature
• "奥氏体-马氏体转变开始温度" 英文翻译 :    motransformation
• "发酵罐发酵初始温度" 英文翻译 :    fermentor set temperature
• "马氏体转变开始温度" 英文翻译 :    msmartensitestartpoint; mspointmartensitestartingpoint
• "制动摩擦片初始温度" 英文翻译 :    ibt iniitial brake lining temperature
• "制动摩擦片初始温度6" 英文翻译 :    ibt iniitial brake lining temperature
• "起始熔化温度" 英文翻译 :    initial melting temperature
• "起始烧结温度" 英文翻译 :    point of incipient sintering; temperature of beginning sintering
• "起始致死温度" 英文翻译 :    incident lethal temperature
• "起始与最终温度" 英文翻译 :    initial and final temperatures
• "起始燃烧温度,初燃温度" 英文翻译 :    temperature of initial combustion
• "起始" 英文翻译 :    origin; origination; parentage; germ; initiation 他的这个问题起始于孩提时代。 his problem began when he was a child

• Temperature of the extrapolated onset
  外推起始温度
• Oit oxidative induction temperature
  氧化起始温度
• Refer processing conditions section of this web site for recommended starting temperatures
  参照本网站的成型条件区作为建议的起始温度。
• This can be caused by the initial oven temperature being set too close to room temperature
  这可能是因为柱箱起始温度设定值过于接近室温。
• Refer to processing conditions section of this web site for recommended starting temperatures
  参照在网站上建议的成型条件区作为建议的起始温度。
• Results showed that the curing temperature of this system was come down , and the mousiture - resistance of this adhesive was improved
  实验结果表明，采用上述的方法，可以大大降低固化的起始温度，并对固化后产物的耐湿热性有一定的提高。
• The results shows that the addition of nucleating agents increased the onset temperature and peak temperature and improved crystallization rate of pp
  结果表明，两种成核剂的加入均可提高聚丙烯的结晶起始温度和结晶峰温度，并加快结晶速度。
• The results showed that beginning temperature of sharp lost of weight of wpc was obviously lower than wood , and the temperature of wmc corresponded to wood
  结果发现，木材酚醛树脂复合材料的急剧失重起始温度明显比木材低，而木材蒙脱土复合材料的急剧失重起始温度与木材相当。
• It was found that in the case of non - isothermal crystallization , the onset and maximum crystallization temperatures of the nylon 6 of the nanocomposites are increased , while the crystallinity and crystallization growth rate is reduced
  在非等温条件下，尼龙6石墨纳米薄片复合体系的结晶起始温度以及最大结晶速率时的温度均比纯尼龙6有明显的提高，但结晶度以及结晶速率却出现下降。
• Tg curves indicate , there were no detectable weight loss below 400 in any composition , the temperature at which weight loss becomes significant decreases , and the magnitude of weight loss increases with increasing sr content , but the onset temperature of weight loss increases and the amou nt of this loss decreases with increasing fe content
  热重曲线表明这类材料在400以下未观察到失重现象，随着sr含量的增加，失重的起始温度有所降低，但失重量反而增加；随着fe含量的增加而增加，失重是源于晶格氧的解析，即与氧空位的生成有关。

• 起始温度的日语：しはつおんど