轴压比的英文

• axial compression ratio
• ratio of axial compressive force to axial compressive ultimate capacity of section

• "轴"英文翻译    axle; shaft
• "压"英文翻译    press; push down; hold down; ...
• "比"英文翻译    2
• "轴压" 英文翻译 :    axial load
• "压比" 英文翻译 :    compression ratio; pressure ratio
• "轴压力" 英文翻译 :    axial compression; axial pressure
• "变压比" 英文翻译 :    ratio of transformation; ratio of transformer; transformation ratio; transformer ratio; transformer-ratio
• "差压比" 英文翻译 :    differential pressure ratio
• "冲压比" 英文翻译 :    ram pressure ratio; ram ratio
• "电压比" 英文翻译 :    ratio voltage; ratio-voltage; voltage ratio method
• "锻压比" 英文翻译 :    ratio of forging reduction
• "分压比" 英文翻译 :    stand-off ratio
• "高压比" 英文翻译 :    high-pressure ratio◇高压比离心压气机 high-pressure ratio centrifugal compressor
• "挤压比" 英文翻译 :    extrusion ratio
• "减压比" 英文翻译 :    pressure reducing ratio
• "降压比" 英文翻译 :    step-down ratio
• "静压比" 英文翻译 :    static pressure ratio; static-pressure ratio
• "落压比" 英文翻译 :    exit pressure ratio
• "囊压比" 英文翻译 :    bag pressure ratio
• "全压比" 英文翻译 :    full pressure ratio; total pressure ratio
• "升压比" 英文翻译 :    step up ratio; step-up ratio
• "余压比" 英文翻译 :    excess pressure ratio
• "增压比" 英文翻译 :    boost ratio; rate of pressurization; rate of supercharging; supercharge ratio
• "总压比" 英文翻译 :    overall pressure ratio; total pressure ratio
• "双轴压缩,双轴压力" 英文翻译 :    biaxial compression

• Cracks control measures for masonry structure
  改善高层建筑下部柱轴压比性能的措施
• The aseismic strengthening methods of the columns with excess axial compression ratio
  轴压比超限的柱抗震加固方法
• Discussion on limit value of axial compression ratio of steel reinforced concrete columns
  钢骨混凝土柱轴压比限值控制的讨论
• And the axial compression ratio index of l , t - shaped columns considering section dimensions is given
  给出了考虑l 、 t形柱截面尺寸的轴压比限值。
• Limited value of axial compression ratio and detailing requirements for stirrup of special shaped rc column
  钢筋混凝土异形柱的轴压比限值与配箍构造
• The reasonable axial compression , load angle and the ratio of stirrup of special - shaped columns are gained from the contrastive analysis
  通过对比分析，得出了异形柱比较合理的轴压比和加载角度。
• Predictions were made on the ductility of the joint core when shear compression ratio , reinforcement contant and axial force ratio were different
  进一步利用jap程序预测了不同剪压比，不同配筋特征值及不同轴压比条件下节点区的延性变化规律。
• ( 2 ) based on the tests and theoretic derivation , skeleton curve of restoring force model of frame column with high axial compression ratio is got
  ( 2 )在试验研究和理论推导的基础上，给出了高轴压比下框架柱恢复力模型的骨架曲线，与试验骨架曲线吻合较好。
• The axial load ratio influenced the cantilever columns behaviors significant , the larger axial load ratio was , the lower ultimate load and worse ductility was shown
  轴压比在较小的时候可以提高钢管混凝土的承载力，当轴压比较大时，其承载力显著降低，延性也较差。
• Furthermore , some parameters that affect the restoring force model of concrete filled steel tubular structure were studied , including axial compression ratio , steel ratio and material strength
  并进一步研究了轴压比、含钢率、混凝土强度和钢材强度等对结构骨架曲线的影响。