轴向压力的英文

• axial compre ion
• axial compression
• axial compressive force
• axial pre ure
• axial pressure
• axle pressure
• kick
• thrust brake

• "轴向"英文翻译    axial
• "压力"英文翻译    pressure; tension
• "轴向压力表" 英文翻译 :    (pressure)gauge with back connection; gauge with back connection
• "轴向压力降" 英文翻译 :    axial drop
• "拱的轴向压力" 英文翻译 :    arch thrust
• "轴向压力负载" 英文翻译 :    axial pre ure load; axial pressure load
• "轴向压力梯度" 英文翻译 :    axial pressure gradient
• "轴向压力载荷" 英文翻译 :    axial compressive load; axial pressure load
• "钻头轴向压力" 英文翻译 :    drill thrust
• "三轴向压力试验" 英文翻译 :    triaxial compression test
• "轴向压缩" 英文翻译 :    axial compre ion; axial compression
• "轴向压缩的" 英文翻译 :    axially compressed; axially-compressed
• "轴向压缩柱" 英文翻译 :    axial compre ion column; axial compression column
• "轴向压应力" 英文翻译 :    axial stress in compression
• "横向压力；侧向压力" 英文翻译 :    lateral pressure
• "抗轴向压缩力" 英文翻译 :    resistance to axial compression
• "轴向压缩应力" 英文翻译 :    axial compressive stress
• "轴向压缩载荷" 英文翻译 :    axial compression load
• "轴向压阻系数" 英文翻译 :    axial piezoresistive coefficient
• "侧向压力" 英文翻译 :    lateral compressive force; lateral pressure; thrust
• "层向压力" 英文翻译 :    edgewise pressure
• "单向压力" 英文翻译 :    uniaxial pressure; unidirectional pressure
• "导向压力" 英文翻译 :    pilot pressure
• "定向压力" 英文翻译 :    direct pressure; direct(directed)pressure; directed pressure; directional pressure; directive pressure
• "法向压力" 英文翻译 :    normal pressure

• Analysis of the ultimate loading capacity of tubular tt - joints under axial compression
  管节点在轴向压力下的极限载荷分析
• Axial compressive load
  轴向压力载荷
• Axial compressive force
  轴向压力
• Axial pressure load
  轴向压力负载
• Fibre optic interconnecting devices and passive components . basic test and measurement procedures . part 2 - 11 : tests . axial compression
  光纤互连装置和无源元件.基本试验和测量程序.第2 - 11部分:试验.轴向压力
• During the ship collision and grounding , the crushing collapse of thin - walled structure subjected to compressive load is one of the important failure modes
  摘要在船舶碰撞和搁浅中，薄壁结构在轴向压力条件下的压溃破坏是一种重要的破坏模式。
• ( 2 ) the numerical result and the critical value ' s effect imposed by circumferential initial stress numerical character on cylindrical thin shell beard the press at axis
  ( 2 )给出了周向初应力数值特征对轴向压力圆柱薄壳临界值的影响，给出数值结果。
• Lastly , the author investigated the impact of the axial pressure gradient on three - dimensional chaotic mixing in eham by computing the mixing efficiency of a tracer
  最后，通过计算三维eham混沌混合中代表性流体质点的拉伸效率行为，确定轴向压力梯度的影响。
• Mas precursor powders were uniaxially pressed at 100 mpa employing a lubricated steel cylindrical mold . after sintering at 1450 for 2 hours , single - phase cordierite ceramic is prepared , and its relative density is 95 . 1 %
  Mas先驱体粉末在100mpa的轴向压力下成型后，经1450无压烧结2小时，得到单相堇青石陶瓷，其致密度达95 . 1 。
• This can be of significant benefit to cut down the cost and time limit for a project the program package gone with this paper may realizes the dynamic simulation for all of courses in hoisting , and may synchronously displays the axis force of derrick , the pull - force of the steel wire , obliquity of equipment and overloading instance
  这有利于工程实践中方案变更、施工现场条件复杂多变等的方案验算，节约成本和缩短工期。本论文程序为桅杆吊装整个过程实现了动态模拟，显示桅杆轴向压力、钢丝绳拉力、设备倾角和起重超载提示，为安全吊装设备提供重要的数据，有利于作业过程的全程监控。

• 轴向压力的日语：じくあっしゅくりょく