针形阀的英文

• annular valve
• needle value
• pintle ale ; needle ale
• pintle valve ; needle valve

• "针"英文翻译    needle
• "形"英文翻译    form; shape
• "阀"英文翻译    established house or power g ...
• "浮筒针形阀" 英文翻译 :    float needle valve
• "杆控针形阀" 英文翻译 :    bar-stock needle valve
• "空注针形阀" 英文翻译 :    hollow-jet needle valve
• "水冷针形阀" 英文翻译 :    water-cooled needle valve
• "弯角针形阀" 英文翻译 :    angle needle valve
• "针形阀塞" 英文翻译 :    needle plug
• "滑动壳针形阀" 英文翻译 :    sliding housing needle valve
• "调节液压给进的针形阀" 英文翻译 :    drivalve
• "针形阀自动关闭压力" 英文翻译 :    automatically shutting pressure of needle valve
• "针式喷管,针式喷嘴,针形阀,针形喷嘴" 英文翻译 :    needle nozzle
• "形阀" 英文翻译 :    d-valve
• "针形" 英文翻译 :    acerosus; aci form; acicularis; aciculiform
• "翼形阀；锥形阀" 英文翻译 :    wing ale; wing valve
• "钟形阀，杯形阀" 英文翻译 :    bell shaped valve（cuvalve）
• "锥形阀；翼形阀" 英文翻译 :    conical ale; conical valve
• "杯形阀" 英文翻译 :    cup valve
• "钵形阀" 英文翻译 :    pot valve
• "锤形阀" 英文翻译 :    hammer valve
• "刀形阀" 英文翻译 :    knife-edge valve; knife－edge valve
• "蹬形阀" 英文翻译 :    stirrup valve
• "碟形阀" 英文翻译 :    mitre valve
• "蝶形阀" 英文翻译 :    butter valve; butterfly gate; butterfly valve; butterflyvalve; fly valve

• All needle valves must be closed on test kit
  检测组件上的所有针形阀必须关闭。
• Needle valves have nps / internal pipe threaded ends
  针形阀配置nps内管螺纹连接端口。
• Before starting test , all needle valves on test kit must be closed
  在开始检测前，检测组件上的所有针形阀都必须关闭。
• Bar - stock needle valve
  杆控针形阀
• Needle valves are intended for use in applications that require precise metering control
  针形阀适用于要求精确控制的应用场合。
• Angle needle valve
  弯角针形阀
• Open needle valve " a " high side and vent needle valve to vent air from bypass hose
  开启针形阀“ a ”高端和排气针形阀，从旁路软管排放空气。
• Connect bypass hose between vent needle valve and loosely connect to test cock no . 1
  在排气针形阀上连接旁路软管，并将其松散连接到测试旋塞1号上。
• Needle valves shall have predictable flow patterns with ( 8 ) molded in increments on the body
  针形阀应该在阀体上具有8个增量模式的可预测流量标记。
• Install a needle valve in the control line . if uneven pressure should cause the regulator to pulsate , its action can be stabilized by throttling the valve
  在控制管线上安装一个针形阀。如果不稳定的压力导致调节阀波动，则这种波动通过对阀门节流将稳定下来。