钻孔直径的英文

• borehole diameter
• diameter of bore
• diameterofbore
• drilled diameter
• hole size
• holesize
• well diameter
• welldiameter

• "钻孔"英文翻译    drill; bore; drill hole perf ...
• "直径"英文翻译    diameter; diam
• "钻孔直径检测" 英文翻译 :    bored hole diameter measurement
• "最大钻孔直径" 英文翻译 :    maximum drilling diameter
• "与主钻孔直径相同的分支钻孔" 英文翻译 :    full-gauge branch hole
• "钻孔直剪仪" 英文翻译 :    borehole direct shear device
• "拔杆孔直径" 英文翻译 :    diameter of guide hole
• "冲孔直径" 英文翻译 :    punching hole diameter
• "井孔直径" 英文翻译 :    well diameter
• "开孔直径" 英文翻译 :    initial hole diameter; top diameter
• "轮毂孔直径" 英文翻译 :    hub bore diameter
• "螺栓孔直径" 英文翻译 :    diameter of bolt hole
• "模孔直径" 英文翻译 :    die throat diameter
• "内孔直径" 英文翻译 :    bore diameter; diameter of bore
• "排料孔直径" 英文翻译 :    relief hole diameter
• "气孔直径" 英文翻译 :    pore diameter
• "筛孔直径" 英文翻译 :    sieve diameter
• "搪孔直径" 英文翻译 :    bore diameter
• "瞳孔直径" 英文翻译 :    pupil diameter; pupillary diameter
• "瞳孔直径计" 英文翻译 :    pupillometer
• "终孔直径" 英文翻译 :    final hole diameter
• "活塞销孔直径" 英文翻译 :    piston go no go plug gage
• "瞳孔直径增加" 英文翻译 :    increase in pupillary diameter
• "允许开孔直径" 英文翻译 :    allowable opening diameter
• "锥形沉孔直径" 英文翻译 :    c-sink diameter

• Application of video streaming media technique in teaching
  本标准适用于最大钻孔直径小于或等于
• Hole diameter drilling capacity
  钻孔直径深度：
• Hydraulic drill drilling couping
  钻孔直径400mm
• Max drill capacity : 65mm
  最大钻孔直径： 65mm
• Engineering drill hole dia .
  钻孔直径：
• Drill hole dia .
  钻孔直径：
• Tubular heat exchangers ; tube pitches , diameter of bores in tube sheets , baffles and support plates
  管式热交换器.管心距管薄板的钻孔直径.挡板和支承
• Due to its light and compact construction the wall saw oukai hds - 350s is the ideal one - man - saw for daily cutting jobs and drilling jobs on job sites
  钻孔施工时效率高，钻孔直径大，是一种可在钢筋混凝土陶瓷玻璃水泥砖及沥青路铁路桥隧钻孔和取样的工具。
• Comparing with non - rotating abrasive jet , the hole diameter and the volume of rock - breaking are many times larger than the former by use of rotary abrasive jet on the same condition
  与非旋转磨料射流相比，同样条件下旋转磨料射流钻孔直径和破岩体积都比前者高出多倍。
• Experiments show that rotary abrasive jet has double profits that are large hole diameter and high rock disintegration efficiency , and with the increment of pump pressure , the hole diameter also increases
  结果表明，旋转磨料射流破岩具有钻孔直径大和破岩效率高的双重优点，并随泵压增加，钻孔直径也增加。