防热套的英文

• heat shroud

• "防热"英文翻译    solar heat protection
• "热套" 英文翻译 :    heating jacket; shrink on; shrink-on; shrinkage fit; thermal shroud
• "防热" 英文翻译 :    solar heat protection◇防热服 heat-resistant clothing; 防热壳 thermal-protective shell; 防热套 heat shroud; 防热系统 heat-protection system
• "保热套" 英文翻译 :    cleading; deading
• "电热套" 英文翻译 :    electric jacket; electric mantle
• "隔热套" 英文翻译 :    heatproof lagging; thermal lagging
• "加热套" 英文翻译 :    heating jacket; heating muff; mantle heater
• "绝热套" 英文翻译 :    fagging; insulation cover
• "热套泵" 英文翻译 :    jacketed pumheatedd; jacketed pump〈heated; jacketed pum〈heated
• "热套管" 英文翻译 :    thermal sleeve; thermowell
• "热套环" 英文翻译 :    shrink ring
• "热套漆" 英文翻译 :    heat sensitive varnish
• "热套圈" 英文翻译 :    shrink ring
• "防热, 耐热" 英文翻译 :    heat proof
• "防热板" 英文翻译 :    heat shield panel
• "防热槽" 英文翻译 :    heat dam
• "防热层" 英文翻译 :    hs heat shield
• "防热的" 英文翻译 :    antipyrogenous; heat proof; heatproof
• "防热服" 英文翻译 :    heat resistant clothing
• "防热壳" 英文翻译 :    thermal-protection shell; thermal-protective shell
• "防热罩" 英文翻译 :    heat shield; heat-protection cover
• "发热套筒" 英文翻译 :    exothermic sleeve
• "隔热套管" 英文翻译 :    thermal sleeve
• "加热套盖" 英文翻译 :    cover for heating jacket
• "加热套膜" 英文翻译 :    mantle

• In conclusion , the method of adding a function layer through type winding will improve the insulating performances greatly while maintaining its original ablative performances . compared with other technical schemes , no special equipment is needed . hence , sufficient raw materials and feasible process enable its promising prospect
  通过以上研究，得到以下结论：采用布带缠绕工艺、在防热层内添加隔热功能层的方案能显著提高其隔热性能，同时保持原有防热套的烧蚀性能和其他物理机械性能，该方案对后续工序无显著影响。
• Based on a cone - shaped compound heatshield , a series of research work has been done from the investigation of theoretical analyses of ablative and insulating principles and technical experiments . 1 based on the exploration of improving material performances , a feasible scheme of adding insulating functional layer is proposed ; 2 a simplified calculation method is proposed via establishing fea ( fmite element analysis ) and instantaneous heat transmission is calculated with the mentioned method ; 3 a practical engineering scheme is proposed through a series of experiments ; 4 the interface problems of the function layer are solved through co - curing method and successful samples are manufactured ; 5 in order to estimate properties , the heatshield was anatomized engineering applied possibility is explored on the analyses of performance evaluation by testing mechanical properties , coefficient of heat conductivity and doing dynamic ablative experiments , also , the comparison with that of the required materials is done
  本文以一锥形复合防热套为研究对象，从烧蚀、隔热机理的理论分析和工艺试验两方面，进行了一下研究工作： 1 、通过对提高材料及制品通过对提高材料及制品隔热性能的多种途径进行探讨，提出了采用添加隔热功能层，研究复合型大面积防热套是理论有效、工艺可行的方案； 2 、通过建立有限元分析模型，对防热套的烧蚀隔热行为进行了理论分析，提出了简化的隔热计算方法，并用该方法对复合型防热套的瞬态传热模型进行了分析计算； 3 、通过复合型防热套的工艺探索试验，提出了一种工程应用上切实可行的工艺方案。
• To meet the demands of higher insulation performances for certain military applications , a compound heatshield design is proposed . a method that adding an insulating functional layer to the interior of the heatshield is adopted to improve its insulation performances while maintaining its original excellent ablative performances
  针对型号发展对烧蚀材料提出的更高的隔热性能要求，本文提出了一种复合型防热套的工艺方案。采用在防热套内层增加隔热功能层的方法，在保持传统防热套良好烧蚀性能的同时，其隔热性能得到了较大地提高。