阻抗值的英文

• impedance value
• resistance value
• value

• "阻抗"英文翻译    impedance
• "值"英文翻译    price; value
• "静态阻抗值" 英文翻译 :    static impedance value
• "绝对阻抗值" 英文翻译 :    absolute impedance value
• "阻抗值测量" 英文翻译 :    impedance value measurement
• "加湿绝缘阻抗值" 英文翻译 :    flux sir
• "抵抗值" 英文翻译 :    r-value
• "端子抵抗值" 英文翻译 :    terminal resistance
• "阻抗" 英文翻译 :    [电学] impedance 反射阻抗 reflected impedance; 阻抗变换器 impedance transformer; 阻抗计 [电工] electrical impedance meter; impedancemeter; impedometer; 阻抗匹配 impedance match; impedance matching; 阻抗器 impedor
• "比阻抗" 英文翻译 :    specific impedance
• "波阻抗" 英文翻译 :    characteristic impedance; surge impedance; wave impedance; wave resistance
• "槽阻抗" 英文翻译 :    slot impedance
• "层阻抗" 英文翻译 :    layer impedance
• "场阻抗" 英文翻译 :    field impedance
• "打阻抗" 英文翻译 :    pile driving resistance
• "低阻抗" 英文翻译 :    low resistance; low-z low impedance
• "点阻抗" 英文翻译 :    point impedance
• "电阻抗" 英文翻译 :    electrical impedance; impedance
• "定阻抗" 英文翻译 :    constant impedance
• "动阻抗" 英文翻译 :    motional impedance
• "端阻抗" 英文翻译 :    terminal impedance
• "复阻抗" 英文翻译 :    comple impedance; compleimpedance; complex impedance; compleximpedance
• "负阻抗" 英文翻译 :    [电学] negative impedance; expedance
• "高阻抗" 英文翻译 :    high impedance◇高阻抗电极 high-impedance electrode; 高阻抗电缆 high-impedance cable; 高阻抗继电器 high-impedance relay; 高阻抗线圈 high-impedance coil; 高阻抗转子 high-impedance rotor
• "光阻抗" 英文翻译 :    light negative

• High iimpedance over a wide frequency range to eliminate emi / rfi
  在较宽的频率范围内有高阻抗值及emi / rfi消作抑制效果。
• Shaft : 6mm dia . discontinued from production ask about item not listed above
  以上轴都是6mm dia . ,未列名阻抗值,请连络存订货
• Results were also run for different high ( relative to the line impedance ) impedance values , including 900 ohms
  此结果也在不同（相对于线路阻抗）的阻抗值上运行了，包括900欧姆。
• For the sake of acquiring preferable quasi - isentropic compression energy waves , wave impedance distribution of the flier - plate had better be controlled between 2 and 3
  为了获得较好的准等熵压缩波形，梯度飞片应以波阻抗值为设计参数，而且其波阻抗分布指数应控制在2 3之间。
• With the radius of the center conductor increasing , the phase velocity is also decreased a lot , the bandwidth is relatively widened , and the dispersion of the structure is weakened but the coupling impedance is lowered
  轴半径增大，相速明显减小，频宽有一定程度的增加，色散减弱，耦合阻抗值降低。
• Moreover , the impedance values decreased , the reactions became more easily , and the charge and discharge performance became better as the discharging potential decreased and the reactions also became easily as the cycling times increased
  且随着放电电位的降低,阻抗值下降,反应变的越容易,充放电性能越好,随着循环次数的进行,反应会变得容易。
• The main operating transformer connected by a adscititious tandem on - load - tap - changing one is the important mode . about this question readers can get a correct and detailed answer from this paper
  通过基本定义和有关名牌值进行了计算和分析，认为在正负极限档，外加串联调压变的阻抗值相对额定档的偏差很小，所以可不必在意这种变压器整体阻抗的偏差值。
• Flier - plate with graded wave impedance , which can be regarded as a new type of functionally graded material since its wave impedance changes quasi - continuously along the thickness " direction and thus has quasi - isentropic compressive characteristics , has come to show great potential for the application in dynamic high - pressure technique
  波阻抗梯度飞片作为一类新型的功能梯度材料，因其波阻抗值沿厚度方向呈准连续变化，而具有准等熵压缩特性，可以看作是功能梯度材料在动高压物理研究领域中的应用新拓展。
• Firstly , object - oriented programming method and relation database technology are used to realize protective information management , with a multiple tires " client / server architecture . using it , the technical staffs can check all kinds of reports , fault waves and setting values of protection . secondly , based on protective principles of ta21 series protection devices , protective function is simulated by using object - oriented technology
  首先，本文将面向对象方法和关系数据库技术结合起来，采用psmis的多层客户?服务器体系结构实现对保护信息的管理，以便供电段技术人员查看保护装置的整定值、各种报告、故障录波(系统不仅能显示波形，还能动态显示波形每一点的峰值、有效值、相位，甚至阻抗值及阻抗角、谐波含量等) 。
• In the present dissertation , the densification mechanisms and the structure controlling of various transient layers of w - mo - ti flier - plates with graded wave impedance were mainly investigated . wholly dense w - mo - ti flier - plates were then prepared by powder stacking and hot - pressing . in order to achieve a required wave impedance profile and a quasi - continuous change along the thickness direction , the ratios of components in transient layers were well adjusted
  论文采用粉末冶金方法，详细研究了w - mo - ti体系梯度飞片材料中各组元的烧结致密化机理与控制方法，以精细控制不同配比的混合粉末的铺填方式与铺填结构来减小梯度飞片材料内部波阻抗值的跃变幅度，成功制备出波阻抗按指定分布特征沿厚度方向准连续变化的、波阻抗面平行度高并且整体致密的w - mo - ti体系梯度飞片。