预留槽的英文

• preformed groove
• provided groove

• "槽"英文翻译    trough; manger
• "留槽" 英文翻译 :    back-joint
• "预留" 英文翻译 :    allowance; reservation; reserved
• "滞留槽" 英文翻译 :    detention tank
• "贮留槽" 英文翻译 :    retention basin
• "留槽待填" 英文翻译 :    back joint
• "污水滞留槽" 英文翻译 :    detention tank
• "预留，预置" 英文翻译 :    pre-set
• "预留地" 英文翻译 :    backuland; backup land; reserve zone
• "预留孔" 英文翻译 :    foreseen hole; preformed hole; preparedhole
• "预留区" 英文翻译 :    future area; reserve zone
• "预留税" 英文翻译 :    withholding tax
• "预留锈" 英文翻译 :    allowance for corrosion loss
• "管道预留地" 英文翻译 :    pipeline reserve
• "路边预留地" 英文翻译 :    verge of road
• "路中预留带" 英文翻译 :    central reservation
• "排气预留孔" 英文翻译 :    weep hole
• "强制预留" 英文翻译 :    obligate
• "土地预留区" 英文翻译 :    land reserve zone
• "预留变形量" 英文翻译 :    reserved deformation
• "预留标题码" 英文翻译 :    reserve heading code
• "预留沉落量" 英文翻译 :    reserve settlement
• "预留存储区" 英文翻译 :    reserved slot
• "预留大小" 英文翻译 :    reserve size
• "预留的直叉" 英文翻译 :    toothing

• This thesis work has researched the fabrication technics of photonic crystal defect waveguide with air - bridge structure and collecting waveguide ; suggested using uv - lithography and wet etching to fabricate traditional waveguide , after that , using eb - lithography and dry etching to fabricate photonic crystal holes , so can reduce the fabrication cost by a big range ; designed the moulding board , which can fabricate the air - bridge structure and is convenient for recognizing position in eb - lithography ; the structure consisted of traditional waveguides and etching grooves are fabricated on soi successfully , then an successful eb - lithography is realized on the structure , the defect waveguide collected with the traditional waveguide quite well ; used the etching grooves to do the sacrificial layer etching experiment , which grounded etching sacrificial layer by photonic crystal holes in next step
  提出采用紫外光刻工艺制作传统波导结构之后，通过电子束曝光和干法刻蚀制作光子晶体小孔的工艺方案，大幅度减低了制作成本；设计出可形成空气桥结构、并且适用于电子束曝光位置识别的光刻模板，在soi材料上成功制作出带有空气桥刻蚀预留槽以及接续光波导的结构，在该结构上成功实现了光子晶体带隙波导的电子束曝光，带隙波导与接续光波导位置接续良好；最后利用预留槽进行了刻蚀牺牲层的实验，为下一步利用光子晶体小孔刻蚀牺牲层形成空气桥结构打下了基础。