齿轮齿形的英文

• form of gear tooth

• "齿轮"英文翻译    cogwheel; gear wheel wheel-l ...
• "齿形"英文翻译    jugged; profile of a tooth; ...
• "齿轮齿形曲线" 英文翻译 :    gear tooth curve
• "齿轮齿" 英文翻译 :    gear teeth; gear tooth; wheel tooth; wheeltooth
• "全高轮齿形" 英文翻译 :    full depth tooth from
• "镶齿轮齿轮" 英文翻译 :    bevel mortise wheel
• "齿轮齿倒棱" 英文翻译 :    tooth chamfer
• "齿轮齿规" 英文翻译 :    gear tooth callipers
• "齿轮齿卡规" 英文翻译 :    gear tooth callipers
• "齿轮齿啮合" 英文翻译 :    gear tooth engagement
• "齿轮齿数比" 英文翻译 :    gear ratio
• "齿轮齿条" 英文翻译 :    gear rack; pinion and rack; pinionandrack; rack and pinion
• "齿轮齿条副" 英文翻译 :    rack-and-pinion
• "齿轮齿条式" 英文翻译 :    pinion and-rack
• "齿轮齿隙" 英文翻译 :    back-lash
• "大齿轮齿宽" 英文翻译 :    wheel facewidth
• "大齿轮齿圈" 英文翻译 :    main gear rim
• "棘轮齿轮" 英文翻译 :    ratchet gear; ratchet tooth
• "螺旋齿轮齿" 英文翻译 :    spiral gear teeth; spiral gear tooth
• "塔轮齿轮" 英文翻译 :    cone gear
• "凸轮齿轮" 英文翻译 :    cam wheel
• "铣齿轮齿" 英文翻译 :    milling gear teeth; milling gear tooth
• "小齿轮齿圈" 英文翻译 :    pinion rings
• "锥齿轮齿宽" 英文翻译 :    face width of tooth in bevel gears and hypoid gears
• "锥齿轮齿数" 英文翻译 :    number of teeth in bevel gears and hypoid gears

• Study on gear tooth surface of generating spur bevel gear
  滚齿直齿圆锥齿轮齿形的研究
• Axial errors and profile errors of noninvolute bevoloid gears
  非渐开线变厚齿轮齿形误差与齿向误差的分析
• The investigation for the profile of asymmetrical involute gear
  非对称齿廓渐开线齿轮齿形的仿真设计分析
• Research on a new in - situ measuring system for large gears profile error
  大齿轮齿形误差在位测量系统的研究
• Therefore , the suitable coefficient of engagement overlap got by profile correction and addendum modification is beneficial to the output property of the gear pump
  因此，对齿轮齿形进行修形和变位修正使齿轮得到合适的啮合重合系数有利于改善齿轮泵的输出特性。
• Employing abrasive machining for the form of the gear and intellective - control carburizing and quenching technology for the surface , the gear is with high intensity , strong tenacity and wearability
  齿轮齿形采用磨齿加工，齿面采用智能控制渗碳淬火技术，齿轮的强度高、韧性和耐磨性好。
• Because of the randomness and fuzziness of the design parameters of double circular arc gears , considering randomness and fuzziness of restrict conditions and influence factors in double circular arc gears , adopting fuzzy optimum design method , a optimum mathematical model of the tooth profile parameters of double circular arc gears is established . some examples and their analysis results are also supplied to demonstrate the feasibility and practicability of fuzzy optimum design . compare with the common optimum design method it is an improvement and development
  由于双圆弧齿轮齿形设计参数具有一定的离散性和模糊性，因此本文考虑约束条件的离散性和模糊性以及影响传动的种种因素的模糊性，采用模糊设计方法，建立了双圆弧齿轮齿形参数优化的数学模型，并结合实际算例进行分析，结果表明了模糊优化设计的可行性和实用性，是对过去双圆弧齿轮齿形参数普通优化设计的一种改进和提高。