齿高的英文

• depth of tooth; height of tooth; length of tooth; tooth depth

• "齿"英文翻译    tooth
• "高"英文翻译    tall; high
• "齿高规" 英文翻译 :    thread height gauge
• "等齿高" 英文翻译 :    zero depthwise taper
• "全齿高" 英文翻译 :    full depth tooth; total depth; whole depth of tooth; wholedepthoftooth
• "弦齿高" 英文翻译 :    chordal addendum; chordal height
• "测量齿高 弦齿高" 英文翻译 :    chordaladdendum
• "测量齿高" 英文翻译 :    chordal addendum
• "长齿高制" 英文翻译 :    deep tooth form; deeptoothform
• "齿高变位量" 英文翻译 :    addendum correction
• "齿高收缩" 英文翻译 :    depthwise taper
• "齿高修形" 英文翻译 :    depth crowning
• "等齿高齿轮" 英文翻译 :    gear with equal addendum teeth; gear with equal-addendum teeth
• "定子齿高" 英文翻译 :    tooth tip depth
• "法向弦齿高" 英文翻译 :    normal chordal addendum
• "工作齿高" 英文翻译 :    working depth of tooth
• "固定弦齿高" 英文翻译 :    constant cord height
• "接触齿高" 英文翻译 :    contact depth of tooth
• "螺纹齿高" 英文翻译 :    height of thread
• "全齿高 齿全高" 英文翻译 :    wholedepth
• "全齿高齿" 英文翻译 :    full depth tooth; full-depth teeth
• "全齿高齿轮" 英文翻译 :    full-depth gear
• "镶齿齿高" 英文翻译 :    insert extension
• "针齿高度" 英文翻译 :    wire height
• "标准齿高齿轮" 英文翻译 :    full depth pear; full-depth gear

• The helical gear transmission with inconstant ademdrum
  变齿高螺旋齿轮传动
• Mean measuring depth
  中点测量齿高
• Constant cord height
  固定弦齿高
• Contact depth of tooth
  接触齿高
• Full - depth teeth
  全齿高齿
• The outside diameter of copper tube shall be tested by micrometer . the tooth depth and the bottom wall thickness shall be tested by microscope
  外径尺寸用外径千分尺测量.齿高和底壁厚用双目倒置小金相测量。
• 4 . the effects of geometrical parameters of microfin tubes on the in - tube boiling heat transfer coefficients is analyzed . in addition , the principles on intensifying heat transfer in microfin tube is also analyzed
  对r290和r404a ，通过研究koyama和thome关联式，分析了内螺纹管齿高、螺旋角等齿型参数对工质沸腾换热性能的影响。
• After thoroughly analyzing the influence of each pump parameters on the gear pump performance , the paper developes the criterion for optimum gear parameters , which can be utilizied in practice easily for gear manufacturing using normal involute gear hob with two - fillet type . the conclutions studied by the paper are : 1 . both the addendum coefficient and the deddendum coefficient of the pump gear should be 1 . 125
  以目前国内普遍使用的双圆弧头全齿高为2 . 5倍模数渐开线标准滚刀作为泵齿轮的加工刀具，通过对齿轮加工原理的分析，提出了欲使泵齿轮参数达到最佳，泵齿轮的齿顶高系数和齿根高系数都为1 . 125 ；对变位系数的确定应考虑到泵齿轮的根切、齿顶厚、重合度以及侧隙因素；泵齿轮为避免过渡曲线干涉，必然要存在根切现象。
• As a new type gear transmission , double circular arc profile bevel gearing carries out its transmission by means of meshing between convex - concave tooth profile in both of the direction of tooth trace and the direction of tooth depth , so it has advantage of high load capacity , long service life , easy forming hydrodynamic oil film between teeth as well as high quality of running - in etc . therefore , more attention has been paid to its application and research in recent years
  作为一种新型齿轮传动方式，双圆弧弧齿锥齿轮传动不论在齿线方向、还是在齿高方向，均为凸、凹齿廓相啮合，因而它比一般的弧齿锥齿轮传动的承载能力高，使用寿命长；并且在啮合过程中两齿面间容易形成润滑油膜，具有良好的跑合性能，所以对它的应用和研究日益受到人们的重视。
• ( 3 ) quadrature experiment consisted of four experimental factors including dental angle , space between dental structure , dental height and the depth of flow passage of dentate , any one of which has four different values . how these dental structural parameters affected hydraulic performance of dentate emitters was studied
  ( 3 )以齿形流道结构中齿角度、齿间距、齿高、流道深度为实验因素，每个因素选用4个水平，进行正交实验，研究了齿形流道结构参数对滴头水力性能的影响。

• 齿高的日语：ぜんはたけ みぞのふかさ はみぞふかさ はたけ