供油提前角的英文

• fuel supply advance angle

• "供油"英文翻译    fuel feeding; oil supply
• "提前"英文翻译    shift to an earlier date; mo ...
• "角"英文翻译    role; part; character
• "柴油机供油提前角检测仪" 英文翻译 :    diesel engine fuel delivery advance angle testing instrument
• "喷油提前角" 英文翻译 :    commencement of fuel injection; fuel injection advance angle
• "喷油提前角太大些" 英文翻译 :    the advance angle is too large
• "喷油提前角调节装置" 英文翻译 :    advancer
• "提前角" 英文翻译 :    advance angle; angle of adance; angle of advance; angle of allowance; angular advance; director angle
• "喷油提前" 英文翻译 :    injection advance
• "喷油提前器" 英文翻译 :    closed nozzle; timing advance unit
• "点火提前角" 英文翻译 :    angle of ignition advance; ignition advance angle; sa spark advance; spark advance angle
• "动态提前角" 英文翻译 :    dynamic lead angle
• "方向提前角" 英文翻译 :    lateral deflection angle
• "高低提前角" 英文翻译 :    vertical deflection angle
• "固定提前角" 英文翻译 :    fixed-lead angle
• "截击提前角" 英文翻译 :    intercept lead angle
• "进气提前角" 英文翻译 :    inlet advance crank angle; intake advance angle; intake trubulence
• "军】提前角" 英文翻译 :    lead angle
• "可变提前角" 英文翻译 :    variable prediction angle
• "离心提前角" 英文翻译 :    centrifugal advance angle
• "满提前角" 英文翻译 :    total lead angle
• "排气提前角" 英文翻译 :    exhaust advance angle; free exhaust
• "喷射提前角" 英文翻译 :    injection advance angle
• "实际提前角" 英文翻译 :    actual equivalent deflection angle; actual lead angle
• "提前角度" 英文翻译 :    tracking wheel

• Effect of fuel supply advance angle on noise of the whole diesel engine
  供油提前角对柴油机整机噪声的影响
• Fuel supply advance angle
  供油提前角
• It ' s the first time to question extensively the influences of fuel delivery advance angle and injection pressure on performance of e30 engine
  首次系统地研究了供油提前角、喷嘴启喷压力对e30混合燃料发动机性能的影响。
• Advanced gas engine test - bed is tested repeatedly to collect and analyze the data parameter of the injection advance , pressure compare and outside characteristics of the supercharging and mid cooling diesel - engines
  采用先进的内燃机试验台架反复测试，对增压中冷柴油机的供油提前角、增压压比、外特性等各项性能参数进行数据采集，并对所采集的数据进行相关分析。
• The results indicate that the fuel delivery advance angle corresponding to the lowest fuel consumption of diesel engine is as similar as that of e30 engine . with the increase of fuel delivery advance angle , nox emission enlarges and smoke reduces
  结果表明： e30混合燃料发动机的最低燃料消耗率对应的供油提前角与原柴油机相当，随供油提前角增大， e30的no _ x排放增加，但烟度降低。
• When the diesel engine fueled with emulsified fuels containing methanol from 10 to 20 percent with the angles of injection adjusted , the performances of it can be improved , thermal efficiency is raised from 5 to 8 percent , temperature of exhaust and smoke are descended
  如果对供油提前角进行适当的调整，柴油机燃用含有10 20甲醇的乳化液时，其性能得到改善，折合燃油消耗率降低5 8 ，发动机的排气温度和烟度均下降。
• The main achievements are as follows : 1 it ' s for the first time to extensively investigate effects of main combustion system parameters such as plunger diameter , plunger stroke , fuel delivery advanced angle , valve opening pressure of nozzle on performance of dme engine . the parameters are optimized
  取得的主要成果有： 1系统地研究了油泵柱塞直径和行程、供油提前角、喷嘴启喷压力等发动机燃烧系统主要参数对二甲醚发动机性能的影响，优化了这些参数。
• On the basis of looking up domestic and foreign literatures and consulting the facts of repairing factory , with 495t diesel engine machine as the study object and the fuel delivery advance angle as the study factor , this thesis has probed into the effect of the deviation of fuel delivery advance angle in each cylinder on exhaust and other performance of engine
  本文在查阅国内外文献及参考修理厂实际情况的基础上，以修理后的495t直喷式柴油机为研究对象，以供油提前角为研究因素，探讨发动机各缸的供油提前角偏差情况对排放及其它性能的影响。
• 2 the load characteristics tests and exhaust emissions measurements of the engine are done at the original fuel delivery advanced angle and modified fuel delivery advanced angles when run on pure dme and different fuel blends consisting of predominant dme and some diesel fuel in the diesel engine stage experiments
  2在柴油机台架实验中，进行了燃烧纯二甲醚以及不同比例的二甲醚和柴油的二元混合燃料模式的燃烧实验，完成了在原机供油提前角、改造后的供油提前角下的负荷特性实验和排放指标的测定。
• Lastly , experimentations are carried out on chaochai 6102bq engine and the data of the thermal parameters according to different oil - apply lead angle is derived . the influence of the change of oil - apply lead angle on the rate of heat release is researched , then a reference is provided for building an accurate heat release model
  最后，在朝柴6102bq柴油机台架上进行了试验，对不同供油提前角下柴油机的热工参数进行实机测试，对试验结果进行了处理、分析，研究了供油提前角的改变对放热规律的影响，为建立该故障下的燃烧放热模型提供参考。