冷却液温度的英文

• coolant temperature

• "冷却液"英文翻译    cooling fluid
• "温度"英文翻译    temperature
• "冷却液温度表" 英文翻译 :    coolant temperature gage; coolant temperature gauge
• "发动机冷却液温度" 英文翻译 :    engine coolant temperature
• "冷却液温度传感器" 英文翻译 :    cts coolant temperature sensor
• "冷却液温度过高" 英文翻译 :    coolant temperature
• "发动机冷却液温度表" 英文翻译 :    engine coolant temperature indicator
• "冷却液温度表传感器" 英文翻译 :    coolant thermometer sensor
• "冷却液温度表及信号灯" 英文翻译 :    coolant thermometer & signal light
• "冷却液" 英文翻译 :    coolant liquid; cooling liquid; liquid coolant; refrigerant
• "充液温度表" 英文翻译 :    liquid-filled thermometer
• "充液温度计" 英文翻译 :    liquid-filled thermometer
• "凝液温度" 英文翻译 :    solid solution temperature
• "血液温度" 英文翻译 :    blood heat
• "低温冷却液" 英文翻译 :    cryogenic liquid
• "冷冻剂，冷却液" 英文翻译 :    refrigerant
• "冷却液泵" 英文翻译 :    coolant pump; pump; coolant
• "冷却液供给" 英文翻译 :    coolant feed
• "冷却液关" 英文翻译 :    coolant off
• "冷却液环路" 英文翻译 :    cooling-fluid loop
• "冷却液开" 英文翻译 :    coolant on
• "冷却液流" 英文翻译 :    coolant flow; cooling spray
• "冷却液流量" 英文翻译 :    coolant flow; coolant rate
• "冷却液流体" 英文翻译 :    coolant fluid
• "冷却液膜" 英文翻译 :    coolant-fluid film; cooling film

• In this research , after testing and studying the engine cooling system , the author finds the factors which influence the system and the changing rules . the coolant temperature of the engine cooling system is influenced by a number of factors , which mostly change unceasingly , and have a non - linear relationship with the engine coolant temperature . and it is difficult to accurately depict the relationship with mathematics equations
  在本课题研究中,通过对汽车发动机冷却系统进行测试与研究,找出了系统的影响因素和变化规律:发动机冷却系统冷却液温度受许多因素的影响,且这些影响因素大多是不断变化的,并与发动机冷却液温度呈非线性关系,发动机的冷却液温度与各影响因素间的关系很难用数学方程进行准确描述,且发动机的冷却液温度的升高和降低是一个缓慢变化和大滞后过程。
• The cooling system for engine adopted hydraulic drive and control technology to control the speed of the fan : the chip adjust the control - current of the proportional value , which used in the engine cooling system , to control the speed of the fan . and the size of the control - current is according to the coolant temperature , coolant temperature change rate and target temperature . as for as the hydraulic cooling system we used a motor to drive and control the fan ’ s work or stop according to the temperature of the hydraulic oil
  该系统的特点及其实现的功能为:电液混合驱动方式改变了工程机械冷却装置驱动方式单一的缺点,发动机冷却系统采用了电液比例技术控制风扇转速;单片机可以根据冷却液温度、冷却液温度变化率和目标冷却液温度调节液压驱动系统中电液比例阀的控制电流,进而控制液压油的流量,即可以实现冷却风扇转速的连续调节;液压油冷却系统采用了电动机驱动,然后由单片机根据液压油的温度控制电动机的起动和停止。