分割曲面的英文

• split surface

• "分割"英文翻译    cut apart; break up
• "曲面"英文翻译    hook face; curve; curved sur ...
• "分割曲线" 英文翻译 :    dividecurve
• "割曲面法" 英文翻译 :    cutting surface method
• "用曲线分割曲线" 英文翻译 :    curve divide curve
• "曲面分割" 英文翻译 :    surface split
• "余割曲线" 英文翻译 :    cosecant curve
• "正割曲线" 英文翻译 :    secant curve
• "分割" 英文翻译 :    cut apartbreak up
• "曲面" 英文翻译 :    hook face; curve; curved surface; camber 内曲面 negative camber; 外曲面 positive camber
• "超前切割曲流" 英文翻译 :    advancecut meander
• "alpha分割" 英文翻译 :    alpha separation
• "包分割" 英文翻译 :    packet fragmentation
• "拆卸；分割" 英文翻译 :    disa emble; disassemble
• "次分割" 英文翻译 :    minor division
• "低分割" 英文翻译 :    harmonic division
• "段，分割" 英文翻译 :    segment
• "分割 区域" 英文翻译 :    division
• "分割 (子算)" 英文翻译 :    disk partitioning
• "分割，分开" 英文翻译 :    division
• "分割；分凝" 英文翻译 :    segregation
• "分割；割开" 英文翻译 :    rip
• "分割比" 英文翻译 :    ratio of division
• "分割表" 英文翻译 :    partitioned data set pds
• "分割刀" 英文翻译 :    rounding knife

• This thesis presents methods to generate tool - path for the rough machining and finish machining of subdivision surfaces
  实现了递归分割曲面模型数控粗加工和精加工的刀具轨迹生成。
• The first one is based on the offset surface of subdivision model . through mapping the original mesh node by node , the offset surface is generated . it can get the interference free tool - path directly from the offset surface without complex interference check and process
  然后实现了两种精加工刀具轨迹生成方法,一种是基于等距面的截平面法,通过点对点法向映射的方法生成递归分割曲面模型法向等距面,由该等距面生成无干涉刀具轨迹。
• Firstly , tool - path for rough machining is generated through setting cutting depth , machining allowance and other parameters . interferences are resolved through raising the z - components of the generated cl point according different kind of situations . and then two methods to generate tool - path for finish machining is presented
  首先通过设定切削深度和加工余量等参数生成递归分割曲面模型的粗加工刀具轨迹,对刀具轨迹生成过程中多种抬刀情况分别进行处理,避免粗加工中的过切干涉。
• As a highly efficient and succinct scheme , the subdivision surface has been widely used in the field of computer graphics and 3d surface modeling . to extend its application in industry , the tool path generation algorithm and simulation for 3 - axis nc machining of the subdivision surface model is studied . two interference - free tool - path generation algorithm using ball - end mills in 3 - axis machining are developed
  递归分割曲面建模方法因为其简洁、高效等特点广泛应用于计算机图形学和曲面造型等领域,为了推广它在工业中的应用,本文研究递归分割曲面模型的数控加工刀位计算及仿真,实现三坐标球头刀数控加工的刀具轨迹生成和加工过程仿真,并对加工结果进行误差分析。