力增量的英文

• force increment

• "增量"英文翻译    increment; augmenter,increme ...
• "动力增量" 英文翻译 :    dynamic increment
• "浮力增量" 英文翻译 :    buoyancy increment
• "推力增量" 英文翻译 :    delta thrust; thrust increase; thrust increment
• "压力增量" 英文翻译 :    pressure excess; pressure increase; pressure increment
• "应力增量" 英文翻译 :    increment of stress; stress increment
• "阻力增量" 英文翻译 :    drag imcrement; drag increment; increase in resistance; resistance increment
• "应力增量系数" 英文翻译 :    stress intensification factor
• "波中航行推力增量" 英文翻译 :    thrust increase in waves
• "波中航行阻力增量" 英文翻译 :    resistance increase in waves
• "跨音速阻力增量" 英文翻译 :    transonic drag rise
• "求跨音速时阻力增量的方法" 英文翻译 :    transonic drag-rise concept
• "增量" 英文翻译 :    [数学] increment; augmenter, incremental quantity; bulking; spike
• "磁力增强" 英文翻译 :    magnetic enhancement
• "动力增加" 英文翻译 :    kraftanstieg load rise angle/slope
• "动力增升的" 英文翻译 :    power augmented; power-augmented
• "动力增升位" 英文翻译 :    power augmentation
• "动力增温" 英文翻译 :    dynamic heating; dynamic warming
• "动力增殖堆" 英文翻译 :    power breeder
• "非劳力增值" 英文翻译 :    unearned increment
• "分辨力增强" 英文翻译 :    resolution enhancement
• "风力增加" 英文翻译 :    prick up
• "风力增强" 英文翻译 :    freshen; pipe up
• "风力增水" 英文翻译 :    wind set up
• "感力增加" 英文翻译 :    feel augmentation

• In addition , the constitutive models included in flac - 3d are deep into research , and th e stress increments are corrected in terms of the plastic strain increment while occurrence of plasticity flow
  此外，还对flac - 3d内嵌的本构模型深入研究，塑性流动发生时塑性应变增量对应力增量的修正。
• The boundary integral equation for elasticity is derived through the general green ’ s formula and the corresponding fundamental solution . the paper represents the contact conditions , which are essential for the coupling of the boundary integral equations of the two different elastic contact bodies , in a local coordinate system properly chosen
  利用广义格林公式和基本解得出弹性问题的边界积分方程,采用循环迭代的方法,通过寻求与接触条件相协调的接触边界位移及面力增量来确定接触区域的大小。
• Moreover , popularizing such system is expected . the following works have been fulfilled within this thesis : first of all , based on the general principle of virtual displacement of nonlinear continuum mechanics , the geometric and material stiffness matrices is presented , several examples show that both of them can give out accurate result
  本论文主要完成了以下工作：首先，根据连续介质力学理论构造出的交错桁架结构空间单元的几何刚度矩阵和弹塑性刚度矩阵，算例分析表明这些矩阵能准确地计算出结构的空间二阶效应和空间单元弹塑性杆端力增量，计算结果具有良好的精度。