厚度减薄的英文

• thickness reduction

• "厚度"英文翻译    thickness; land
• "减"英文翻译    subtract
• "薄"英文翻译    duckweed
• "过度减薄" 英文翻译 :    excessive thinning
• "等密度减薄液" 英文翻译 :    cutting reducer
• "厚度减少" 英文翻译 :    decreased thickness
• "甲厚度减少" 英文翻译 :    decreased thickness of nail
• "皮肤厚度减少" 英文翻译 :    decreased thickness of skin
• "强度减半厚度" 英文翻译 :    half-thickness; half-value thickness
• "减薄" 英文翻译 :    attenuate; burn back; thinning down
• "半吸收厚度 半值层 强度减半厚度" 英文翻译 :    half-valuethickness
• "减薄层" 英文翻译 :    attenuated layer
• "减薄的" 英文翻译 :    bled
• "减薄液" 英文翻译 :    reducer
• "厚度" 英文翻译 :    thickness; land (刀刃的)
• "壁厚减薄" 英文翻译 :    wall thickness reduction
• "壁厚减薄率" 英文翻译 :    wall thickness reduction
• "齿厚减薄量" 英文翻译 :    reduction in tooth thickness
• "等量减薄液" 英文翻译 :    cuttingreducer; subtractivereducer
• "地壳减薄" 英文翻译 :    attenuation of crust
• "电解减薄法" 英文翻译 :    electrothinning
• "法氏减薄液" 英文翻译 :    farmer's reducer
• "腐蚀减薄" 英文翻译 :    decrease in thickness due to corrosion
• "化学减薄" 英文翻译 :    chemical reduction
• "减薄拉延模" 英文翻译 :    ironing die

• Textile floor coverings . determination of thickness loss under dynamic loading
  纺织地毯.在动态荷载下厚度减薄的测定
• Textile floor coverings . determination of thickness loss after brief , moderate static loading
  纺织地毯.短时间施加中等静负荷后厚度减薄的测定
• Textile floor coverings . determination of thickness loss after prolonged , heavy static loading
  纺织地毯.长时间施加中等静负荷后厚度减薄的测定
• Make use of high strength , it is still keep the machinery function of car body when its thickness gets thin , as a result , remit the car weight
  利用高强度特性，可以在厚度减薄的情况下依然保持汽车车身的机械性能要求，从而减轻了汽车重量。
• Sheet thickness is thinned , surface area is increased in the nc incremental sheet metal parts forming process , and sheet forming point by point is to lead to the whole sheet deformation
  认为，板料零件数控渐进成形是使板料的厚度减薄，表面积增大，靠逐次的变形累积产生整体的变形。
• Above 450 , the formation of low density u ( al , si ) 3 phase , together with the release of the impurity gas and fragmentation of u3si2 particles , will cause fuel meat to swell , al matrix to crack and u3si2 particles to invade to clad . as a result , the thickness of the meat increased , the thickness of clad decreased and the deformation of fuel plates increased , and the leakage probability of the radioactive mass increased reasonably
  同时，由于芯体膨胀及铀硅颗粒碎裂的综合作用，使u _ 3si _ 2颗粒向包壳侵入，最终使燃料板芯体厚度增加较大，芯体及燃料的体积也显著增加，包壳厚度减薄；高温将加速芯体u _ 3si _ 2颗粒碎裂、芯体开裂、包壳以及燃料板变形，从而使燃料芯体与包壳脱开，最终可能导致放射性物质泄漏。
• Fictious simulation of high - speed roll casting has been carried out on the basis of the fact . the results showed that roll casting speed increase with the decrease of the thickness of the strip , and the peak value of rolling pressure decrease with the increase of roll casting speed and thickness of strip or the increase of roll casting zone . the designed parameters of mechanical capabilities of the roll caster should be raised when rolling pressure increase with roller diameter increase
  研究结果表明，减薄铸轧板坯厚度可提高铸轧速度；随着铸轧速度降低、铸轧区增大与铸轧坯厚度减薄，轧制压力峰值增大；随着铸轧辊径增大，轧制压力增大，因此铸轧机力能设计参数也要相应增大。