壁厚减薄的英文

• wall thickness reduction

• "壁厚"英文翻译    wall thickness
• "减"英文翻译    subtract
• "薄"英文翻译    duckweed
• "壁厚减薄率" 英文翻译 :    wall thickness reduction
• "罗克内尔式大口径管材壁厚减薄用轧机" 英文翻译 :    roeckner tube rolling mill
• "齿厚减薄量" 英文翻译 :    reduction in tooth thickness
• "减薄" 英文翻译 :    attenuate; burn back; thinning down
• "壁厚" 英文翻译 :    wall thickness 壁厚不均 wall unevenness
• "皮厚减量" 英文翻译 :    bark deduction
• "减薄层" 英文翻译 :    attenuated layer
• "减薄的" 英文翻译 :    bled
• "减薄液" 英文翻译 :    reducer
• "壁厚比" 英文翻译 :    wall ratio
• "壁厚度" 英文翻译 :    lvwt; rwt; wall thickness
• "壁厚计" 英文翻译 :    wall thickne gauge; wall thickness gauge
• "管壁厚" 英文翻译 :    thickness of pipe wall; thickness of pope wall
• "全壁厚" 英文翻译 :    full wall thickness
• "等量减薄液" 英文翻译 :    cuttingreducer; subtractivereducer
• "地壳减薄" 英文翻译 :    attenuation of crust
• "电解减薄法" 英文翻译 :    electrothinning
• "法氏减薄液" 英文翻译 :    farmer's reducer
• "腐蚀减薄" 英文翻译 :    decrease in thickness due to corrosion
• "过度减薄" 英文翻译 :    excessive thinning
• "厚度减薄" 英文翻译 :    thickness reduction
• "化学减薄" 英文翻译 :    chemical reduction

• Corrosion and pitting defects in pipe work are major problems in the oil , chemical , and other industries
  管道的腐蚀、壁厚减薄等缺陷是石油、化工和水暖工业中面临的主要问题。
• These defects can occur at the outer or inner surface of the pipe and can lead to a serious loss of pipe wall thickness
  这些缺陷既可能发生在管道外壁又可能发生在管道内壁，通常致使管道壁厚减薄。
• Trough choosing different professing parameters including the ratio of thinning and the ratio of feeding and using two rollers power spinning machine experiment research on cylinders with inner ribs has been started
  摘要通过选取不同的壁厚减薄率和旋轮进给比作为工艺参数，利用双旋轮强力旋压机对带内筋筒形件作旋压加工实验。
• Its reliability has been tested though examining . the influence laws of mould structure , including wiper die and the style , size and installed position of mandrel , have been studied . combined with the theoretical analysis of perfect pure bending , the tendency of relative bending radius r / d and relative wall thickness t / d to one of the major quality target - the maximum wall thickness reduction ratio is also studied
  通过数值模拟研究获得了包括防皱块和芯棒形式、尺寸和安装位置在内的模具结构对制件成形质量的影响规律；结合对理想纯弯曲的理论分析，研究获得了相对弯曲半径r / d 、相对壁厚t / d对制件主要质量指标之一的最大壁厚减薄率的影响趋势和大小。