法向矢量的英文

• normal vector

• "法向"英文翻译    normal; heave
• "矢量"英文翻译    vector; complexor
• "法向矢量, 标准矢量" 英文翻译 :    normal vector
• "方向矢量" 英文翻译 :    direction vector
• "横向矢量角" 英文翻译 :    lateral vectoring angle
• "径向矢量" 英文翻译 :    radial vector
• "正方向矢量" 英文翻译 :    upvector u vector eff effector bone root implicit
• "轴向矢量" 英文翻译 :    axial vector
• "雷达航向矢量" 英文翻译 :    radar vector on course
• "方向矢量平均数" 英文翻译 :    directional vector mean
• "辐向矢径,位置矢量" 英文翻译 :    radius vector
• "由路径和方向矢量定义的曲面" 英文翻译 :    tabulated surface
• "法向" 英文翻译 :    normal; heave
• "矢量" 英文翻译 :    [数学] [物理学] vector; complexor◇矢量分析 vector analysis; 矢量空间 vector space; 矢量图 vectogram; vector diagram; arrow diagram
• "辐向矢径" 英文翻译 :    radius vector
• "法向的" 英文翻译 :    normal
• "法向角" 英文翻译 :    normal angle
• "法向力" 英文翻译 :    normal force
• "法向量" 英文翻译 :    normal vector; normalvector; surface normal
• "法向面" 英文翻译 :    normal plane; normal surface
• "法向值" 英文翻译 :    nominaler wert nominal value
• "法向轴" 英文翻译 :    normal axis
• "双法向" 英文翻译 :    binormal 3d vectors
• "一法向" 英文翻译 :    conform
• "法向微分, 法向求导" 英文翻译 :    normal differentiation

• By means of the transformation from the focal coordinate system to the observation system , we obtained the external normal vector of the focal fault plane expressed in its observation system , and obtained the macrodamage degree of the researched block , which is calculated in dyadic
  由震源坐标系表示的震源断层面换算到观测坐标系得到其外法向矢量，可求得研究地块以地震裂纹密度张量计算的宏观损伤度的变化。
• The main work completed in the paper is listed as following : 1 . image function acquisition - , 2 . read bmp files by dib format ; 3 . drawing gray scale histogram ; 4 . choose a optimum threshold and make gray image become binary image - , s . find image ' s contour points by making inner points become empty and apply template matching on the contour points ; 6 . transform the object ' s beginning points ( pixel point ) to the ones in the image coordinate and the positions of in the corresponding three dimensions ; 7 . compute the position vector and the normal vector of the object
  选择一个最佳阕值，把灰度图像进行二值化处理； 5用掏空内部点法，找到图像的轮廓点，然后在轮廓点上进行模板匹配； 6把输出的目标物开始点(像素点)转化成图像坐标系中的点和对应的三维空间的坐标位置； 7计算目标物的位置矢量和法向矢量，根据机器人抓取面的法向矢量，找到机器人要抓取的平面； 8
• The solutions include : the unit normal vector of the elastic - plastic boundary near the crack line , the elastic - plastic stress fields near crack line , law that the length of the plastic zone along the crack line is varied with an external loads , the maximum lengths of the plastic zone , the bearing capacity of a finite plate with an eccentric crack loaded by shear forces
  这个解包括：裂纹线附近弹塑性边界上的单位法向矢量，裂纹线附近的弹塑性解析解、最大塑性区长度、裂纹线上的塑性区长度随荷载的变化规律及其承载力。