纵向载荷的英文

• longitudinal load
• thrust load

• "纵向"英文翻译    direction; machine direction ...
• "载荷"英文翻译    load; loading
• "临界纵向载荷" 英文翻译 :    buckling load
• "纵向载荷因数" 英文翻译 :    longitudinal load factor
• "变向载荷" 英文翻译 :    reversal load
• "侧向载荷" 英文翻译 :    lateral loading; side load
• "层向载荷" 英文翻译 :    edgewise load
• "法向载荷" 英文翻译 :    normal load
• "反向载荷" 英文翻译 :    reversed load
• "横向载荷" 英文翻译 :    lateral load; transverse loading
• "横向载荷桩" 英文翻译 :    laterally loaded vertical piles
• "径向载荷" 英文翻译 :    radial load
• "拉向载荷" 英文翻译 :    tension loading
• "切向载荷" 英文翻译 :    tangential load
• "竖向载荷" 英文翻译 :    vertical load
• "双轴向载荷" 英文翻译 :    biaxial load
• "弦向载荷" 英文翻译 :    chordwise load
• "压向载荷" 英文翻译 :    compression loading
• "轴向载荷" 英文翻译 :    axial loading; direct-thrust a-frame; thrust load
• "法向载荷因数" 英文翻译 :    normal load factor
• "横向载荷试验" 英文翻译 :    lateral load test
• "横向载荷因数" 英文翻译 :    transverse load factor
• "径向载荷分布" 英文翻译 :    radial load distribution
• "径向载荷系数" 英文翻译 :    radial load factor
• "三向载荷试验" 英文翻译 :    three-plate loading test

• In this section we discuss the longitudinal load effects .
  在此，我们讨论纵向载荷影响。
• The nanoscratching data showed that the thickness of ti - dlc film was about 700 nm . the load on the sample was 80mn and the friction force was 18mn when the film was lacerated
  纳米划痕实验结果表明, ti - dlc膜的厚度大约为700nm ,划破时的纵向载荷为80mn ,摩擦力为18mn 。
• The result of nanoscratching modeling showed that the load on the sample and friction force increased linearly at the initial stage . the load on the sample and the friction force increased suddenly when the film hardened
  纳米划痕实验的数值模拟表明, ti - dlc膜在压头划痕初始阶段,纵向载荷和摩擦力都呈线性缓慢增加,在某一点发生突变,这时膜发生了硬化。
• In this thesis , according to rules of intensity design for standard gauge freight wagons , the major difference between the standard gauge and the meter - gauge was analyzed . especially , the longitudinal load is researched , and simulation programs are designed , the maximal longitudinal force between couplers is calculated in the situations of traction and brake . and based on the application situations of kunming railway bureau , the specification for the intensity design and accreditation test about the meter - gauge freight car is established
  本论文根据准轨货车强度设计标准，对准轨、米轨差异较大部分，特别针对其纵向载荷进行了研究计算，编制了计算机仿真程序，求解了米轨货物列车在牵引、制动等工况下车钩间的最大纵向作用力，并结合昆明铁路局米轨线路的实际运用情况，制定出了米轨货车强度设计与试验鉴定准则。

• 纵向载荷的日语：たてかじゅう