预紧的英文

• pretension

• "预"英文翻译    in advance; beforehand
• "紧"英文翻译    taut; tight
• "预紧集" 英文翻译 :    precompact set; totally bounded set
• "预紧力" 英文翻译 :    initial tension; predetermincd tension; preliminary tension; preload; pretightening force; pretightening load; pretightening up force
• "预紧器" 英文翻译 :    preloader
• "预紧弹簧" 英文翻译 :    preloaded spring
• "预紧轴承" 英文翻译 :    preloaded bearing
• "轴向预紧力" 英文翻译 :    axialkraftbeaufschlagung axial load application
• "弹簧预紧装置" 英文翻译 :    spring preloading device
• "法兰预紧弯矩" 英文翻译 :    flange moment under pretightening condition; moment acting on the flange for gasket seating
• "缓冲器预紧力" 英文翻译 :    draft gear initial compression
• "螺栓预紧载荷" 英文翻译 :    bolt load for gasket sealing; bolt load under pretension condition; boltloadforgasketsealing
• "预紧密封比压" 英文翻译 :    pretightening unit sealing load
• "预紧橡胶衬套" 英文翻译 :    preloaded rubber bushing
• "安全带预紧装置" 英文翻译 :    seat belt pre-tensioner
• "界限预紧密封比压" 英文翻译 :    limit pretightening sealing load
• "最小预紧密封比压" 英文翻译 :    minimum pretightening sealing load
• "燃爆式安全带预紧装置" 英文翻译 :    pyrotechnical pretensioners, front / rear outer positions
• "预金属络合的染料" 英文翻译 :    pre-metallised dye
• "预金利息" 英文翻译 :    creditinterestt
• "预借载货证券" 英文翻译 :    advanced bill of lading
• "预借提单" 英文翻译 :    advance bill of lading; advanced bill of lading (advanced b/l); advanced-date b/l
• "预借瓶" 英文翻译 :    supplementary bottle

• Preload and fatigue life of high strength bolt
  高强度螺栓的预紧力及疲劳寿命
• A new method of pre - tightening for king diameter coupling bolt
  大直径联接螺栓预紧的一种新方法
• Research and application of high pre - clamping bolt fitted mounting apparatus
  高预紧力锚杆配套安装机具的研究应用
• Analysis and theoretical guiding for cushion bolt tighten of small safety catcher
  小型防坠器的缓冲器螺栓预紧力的分析及理论推导
• An analysis on the affection of pre - tightened radial force and its optimal value was carried out
  对径向预紧力的作用和最佳数值进行了分析。
• Numerical simulation of contact status on connection structure with pre - tightening porous silicone rubber cushion
  带预紧硅泡沫垫层结构接触状态的有限元分析
• The characteristics of solenoid were calculated and analyzed by using the finite element method
  结果表明：影响电磁阀性能的主要参数有驱动电压、初始气隙、预紧力、运动部件的质量等。
• When the contact models are being built , an effective method is presented to solve the problem of bringing pre - load force
  在建立接触模型时，对预紧力的施加提出了有效可行的处理方法。
• Structure strength of flanged connection for rocket motors must be guaranteed in bolt - up and operating conditions
  火箭发动机法兰连接结构首先要求各连接元件在预紧和操作情况下不发生强度破坏。
• Lots of designing projects has been afforded such as advanced - tight structure of framing ^ whole - welding structure and moved - cylinder structure
  本文中提供了多种本体设计方案，主要有预紧框架式结构、整体焊接式结构及缸动式结构。

• 预紧的法语：serrage préliminaire