固化时间的英文

• cure time
• curing time

• "固化"英文翻译    welding; solidify; solidifyi ...
• "时间"英文翻译    time; hour
• "砂浆固化时间" 英文翻译 :    slurry hardening time
• "陈化时间" 英文翻译 :    assembly time
• "稠化时间" 英文翻译 :    thickening time
• "磁化时间" 英文翻译 :    magnetizing time
• "叠化时间" 英文翻译 :    dissolve time
• "孵化时间" 英文翻译 :    brooding time
• "汞化时间" 英文翻译 :    amalgamation time
• "合金化时间" 英文翻译 :    alloying time
• "活化时间" 英文翻译 :    activation time
• "极化时间" 英文翻译 :    polarization time
• "焦化时间" 英文翻译 :    carbonizing time; coking time; scorch time
• "胶化时间" 英文翻译 :    gel time
• "净化时间" 英文翻译 :    clarification time
• "老化时间" 英文翻译 :    ageing time; aging time; burning-in period; digestion time
• "硫化时间" 英文翻译 :    cure time; curing time; length of cure; vulcanizing time
• "慢化时间" 英文翻译 :    retardation time; slowing-down time
• "漫化时间" 英文翻译 :    moderation time
• "敏化时间" 英文翻译 :    sensitization time
• "破乳化时间" 英文翻译 :    deemulsification time
• "热化时间" 英文翻译 :    thermalization time
• "融化时间" 英文翻译 :    thawing time
• "熔化时间" 英文翻译 :    fusing time; melt down time; melt-down time; melting time
• "乳化时间" 英文翻译 :    emulsification time; emulsificationtime

• Reporting cure times of ultraviolet - cured coatings
  紫外线固化涂料固化时间的报告
• Testing method for setting time of refractory mortars
  耐火泥固化时间的试验方法
• Test method for determining stroke cure time of thermosetting phenol - formaldehyde resins
  热固性酚醛树脂冲击固化时间的测定
• Rate of cure and final strength will depend on the resistance time at the cure temperature
  固化比率及最终固化强度取决于在固化温度条件下所持续的固化时间。
• Method of test for hydraulic setting floor smoothing and or levelling compounds - determination of setting time ; german version en 13409 : 2002
  液压固化地板平整复合物的试验方法.固化时间测定;德
• After the electrophoresis , the magnets should be solidified on the low temperature firstly , then solidified in the high temperature
  电泳后应先低温烘烤去除水分，然后高温固化；合适的固化温度是170左右，合适的固化时间为20min左右。
• The curing of the magnets always in the vacuum circumstance . as far as the mixture cohesion is concerned , the optimized curing temperature and time are 120 and 120min
  所用粘结剂合适的固化温度是120 ，合适的固化时间是120min ，固化后磁体应该随炉冷却。
• The research of phenol - formaldehyde ( pf ) resin modified with lac can be expected to widen the application of the lac and enlarge the utilization of the renewable resource
  研究了对紫胶改性酚醛树脂胶粘剂的固化时间、粘接胶合板的粘接强度和甲醛释放量进行了测定。
• The curing time of the modified pf resin and the adhesive strength and emission of formaldehyde of the plywood bonded with this modified pf resin was measured in this paper
  结果表明:紫胶改性酚醛胶的固化时间与普通酚醛胶接近,粘接胶合板的粘接强度达到类胶合板的要求,胶合板的甲醛释放量降低。
• Low temperature flexible , easily pourable rtv silicone sealant / encapsulant , can be used with a wide variety of curing agents , thus varying pot life , cure time , mix ratios and cure conditions
  低温弹性，易浇注的rtv密封硅胶，可与多种固化剂使用，可改变灌胶时间、固化时间、混合比率以及固化条件。

• 固化时间的日语：こうかじかん