固化的英文

英文翻译手机版

[地质学] welding; solidify; solidifying; consolidation; solidification
◇固化处理 curing process; solidification process; 固化点 solidification point; 固化剂 curing agent; firming agent; 固化酒精 solidified alcohol; 固化油 solidified oil; 固化作用 solidification

"固化；凝固" 英文翻译 : solidifying
"固化；熟化" 英文翻译 : cure; curing
"固化；硬化" 英文翻译 : stiffening
"固化层" 英文翻译 : consolidated monolayer
"固化的" 英文翻译 : petrified; solidified; solidify
"固化点" 英文翻译 : point of solidification; solidification point
"固化度" 英文翻译 : degree of cure
"固化法" 英文翻译 : solidification method
"固化剂" 英文翻译 : curative agent; cure agent; curing compound; firming agents; hardener , curing agent; setting agent; solidified agent; solidifyingagents
"固化炉" 英文翻译 : curing furnace; curing oven
"固化期" 英文翻译 : cure period
"固化热" 英文翻译 : heat of solidification; solidification heat
"固化水" 英文翻译 : solidified water; water， solidified
"固化物" 英文翻译 : condensate
"固化油" 英文翻译 : solidified oil
"固化脂" 英文翻译 : rendered fat
"固结，固化" 英文翻译 : solidify
"光固化" 英文翻译 : light-cure; photo-cure
"后固化" 英文翻译 : after cure; aftercure; post cure; postcure; postcuring
"坚固化" 英文翻译 : firming
"可固化" 英文翻译 : solidifiable
"冷固化" 英文翻译 : cold cure; cold curing; cold setting; cold-setting
"凝固化" 英文翻译 : cure; solidification
"欠固化" 英文翻译 : under cure
"固化，硬化，凝固" 英文翻译 : cure
"固厚" 英文翻译 : guhou

typical cure temperatures range from 125 to 175℃.
典型的固化温度范围从125175。
Shrinkage stress was found to increase linearly with cure temperature .
我们发现收缩应力随固化温度直线增加。
The final operation in propellant manufacture is the curing of the binder .
制造推进剂的最后操作是粘合剂的固化。
Birefringence of the cured resin was measured with a senarmont compensator .
用塞拿蒙补偿器测定固化树脂的双折射率。
Again, if there is excessive relative sliding the fluid will become too hot to solidify .
液体温度太高以致也不能固化。
The force between a pair of helium atoms is so weak that helium does not solidify at all .
一对氦原子之间的作用力微弱得使氦根本不能固化。
The rate of curing and consequently the rate of heat generation increase with the temperature .
固化速度，因而还有放热速度，都随温度而增加。
In this department, hydroset plates are assembled and joined together at the plate lugs .
在这个工段，组装脱水固化的极板并通过极板耳连在一起。
These stresses arise from the exothermic nature of the reaction during gelatin and cure .
这种残余应力系由凝胶和固化期间化学反应能放出的热引起的。
Koch perceived that it would be far better if one could solidify a well-tried liquid medium with some clear substance .
郭霍设想，如果能用某种透明物质将经过多次试验的培养液固化可能更好。