固化物的英文

• condensate

• "固化"英文翻译    welding; solidify; solidifyi ...
• "物"英文翻译    thing; matter; object
• "万公斤固化物" 英文翻译 :    milksolid
• "硫过氧化物固化" 英文翻译 :    sulfur-peroxide cures
• "固化" 英文翻译 :    [地质学] welding; solidify; solidifying; consolidation; solidification◇固化处理 curing process; solidification process; 固化点 solidification point; 固化剂 curing agent; firming agent; 固化酒精 solidified alcohol; 固化油 solidified oil; 固化作用 solidification
• "化物" 英文翻译 :    chalcogenide
• "固化；凝固" 英文翻译 :    solidifying
• "固化；熟化" 英文翻译 :    cure; curing
• "固化；硬化" 英文翻译 :    stiffening
• "固化层" 英文翻译 :    consolidated monolayer
• "固化的" 英文翻译 :    petrified; solidified; solidify
• "固化点" 英文翻译 :    point of solidification; solidification point
• "固化度" 英文翻译 :    degree of cure
• "固化法" 英文翻译 :    solidification method
• "固化剂" 英文翻译 :    curative agent; cure agent; curing compound; firming agents; hardener , curing agent; setting agent; solidified agent; solidifyingagents
• "固化炉" 英文翻译 :    curing furnace; curing oven
• "固化期" 英文翻译 :    cure period
• "固化热" 英文翻译 :    heat of solidification; solidification heat
• "固化水" 英文翻译 :    solidified water; water， solidified
• "固化油" 英文翻译 :    solidified oil
• "固化脂" 英文翻译 :    rendered fat
• "固结，固化" 英文翻译 :    solidify
• "光固化" 英文翻译 :    light-cure; photo-cure
• "后固化" 英文翻译 :    after cure; aftercure; post cure; postcure; postcuring
• "坚固化" 英文翻译 :    firming

• Effect of the electric pre - stress on fissure of epoxy polymer
  预电应力对环氧树脂固化物开裂的影响
• Structure and property of co - curing reaction product for epoxy and cyanate resin system
  环氧树脂与氰酸酯共固化物的结构与性能
• Because of the outstanding advantages , the epoxy resin is widely used in various fields , especially in the fields such as electronics , covering materials and synthetic materials etc
  由于环氧树脂固化物所具备的优良性能，使得环氧树脂被广泛地应用于各行各业。特别是电子、电气封装材料、复合材料等领域。
• As the content of the expanded vermiculite was 20 % , the tonset of the polybenzoxazine ( mulitphenol type ) / vermiculite hybrid nanocomposites from its tga cure was 35 chigher than that of the polybenzoxazine ( mulitphenol type ) / phlogopite composites
  膨胀蛙石含量为20时，插层纳米固化物的起始热分解温度高于金云母的约35t 。
• The cured products had lower cure - degree and even lower cross - linking density . the weight loss at the second peak ( 300c ~ 550c ) of dtga was 64 % , but the weight loss of polybenzoxazine ( bisphenol a type ) itself was only 8 . 5 %
  Tga分析：固化物在第二微分失重峰( 300 550 )处迅速失重64 ，没有第三失重峰，而在此处树脂失重仅8 . 5 。
• Its bend strength is 144 . 1 mpa , impact strength is 13 . 5 kj / m2 and martin heat - resistant temperature is 160 . and the heat decompounding temperature of the resin is 350 , which is confirmed by the tga of cured resin
  同时对改性后树脂固化物进行热失重分析，确定树脂固化物热分解温度为350 。表明通过改性后的双马树脂具有较好的力学性能和耐热性。
• A . the preparation of sliding ink for plastic printing . b . , widely used in ht e preparation of double components epoxy paint and epoxy adhesive , the curing matter own fine mechanical and electrochemical property ; it is also applied in the manufacture of low temp
  B二聚酸与多元胺反应生成具有活性胺基的聚酰胺，广泛应用于制造双组份环氧油漆及环氧粘结剂，固化物具有良好的机械电化学等性能。
• Filling flexibilizer , such as epoxy terminal block , polyurethane ether structure , thiokol and liquid ctbn to the system of expoxy - mannich amide , through the test on shear strength , bounding elasticity modulus and break strength of cured products , the different fuction could be found using different flexibilizers
  摘要在环氧酚醛胺体系中使用端环氧基聚氨酯醚、聚硫橡胶、液体丁腈橡胶等活性增韧剂，通过对固化物剪切强度、弯曲弹性模量及断裂强度的测试对比，可以看出不同增韧剂效果不同。
• It is discovered that the diameters of silicon rubber decrease and the number of silicon rubber increase by the dc electric pre - stress applied during solidifying of silicon rubber - toughened epoxy resins . the effect is independent of the polarity of electric pre - stress , but it is dependent of the intensity of electric pre - stress
  本文通过实验研究证实：在硅橡胶改性环氧树脂的固化过程中所施加直流预电应力导致了固化物中硅橡胶相数量增多、尺寸减小；并且，预电应力的这种效应与预电应力的极性无关，但与预电应力的水平有关。
• In addition , it is found that dc electric field weakens the effect of release agent and strengthens the binding strength between epoxy resins and anode in the condition of the existence of release agent . but this effect of electric field is not discovered between epoxy resins and cathode
  另外，本文通过实验研究还证实：在有脱模剂存在的情况下，固化过程中直流电场的存在会弱化脱模剂的作用进而强化环氧树脂固化物与金属正电极间的粘接强度，但直流电场对环氧树脂固化物与金属负电极间的粘接强度没有明显影响。