固化度的英文

• degree of cure

• "固化"英文翻译    welding; solidify; solidifyi ...
• "度"英文翻译    surmise; estimate
• "化度" 英文翻译 :    to convert and transport or save
• "固化" 英文翻译 :    [地质学] welding; solidify; solidifying; consolidation; solidification◇固化处理 curing process; solidification process; 固化点 solidification point; 固化剂 curing agent; firming agent; 固化酒精 solidified alcohol; 固化油 solidified oil; 固化作用 solidification
• "稠化度" 英文翻译 :    degree of thickening
• "纯化度" 英文翻译 :    degree of purification
• "分化度" 英文翻译 :    degree of differentiation
• "风化度" 英文翻译 :    degree of weathering; weathering grade
• "膏化度" 英文翻译 :    degree of creaming
• "光化度" 英文翻译 :    actinic value of light; actinicity; actinisity; actinism; actinity
• "环化度" 英文翻译 :    degree of cyclization
• "磺化度" 英文翻译 :    degree of sulphonation
• "活化度" 英文翻译 :    activation grade; activity
• "极化度" 英文翻译 :    degree of polarization; polarizability; polarization
• "晶化度" 英文翻译 :    degree of crystallization
• "净化度" 英文翻译 :    degree of purification
• "苛化度" 英文翻译 :    carsticity
• "矿化度" 英文翻译 :    degree of mineralization; extent of mineralization; mineral content; mineral salt concentration , mineralization; mineral salt concentration ， mineralization; salinity
• "劣化度" 英文翻译 :    degree of deterioration; impairment grade
• "硫化度" 英文翻译 :    cure level; curing level; degree of vulcanization; level of cure; sulfidity; sulphidity
• "慢化度" 英文翻译 :    degree of moderation
• "煤化度" 英文翻译 :    degree of coalification
• "醚化度" 英文翻译 :    degree of etherification
• "氢化度" 英文翻译 :    degree of hydrogenation
• "熔化度" 英文翻译 :    meltability

• 1 cured with good products
  1产品固化度好。
• Numerical simulations on the relationship between polymer blend microstructure parameter and crazing
  聚合物基复合材料模压成型过程固化度与非稳态温度场的数值模拟
• As a result of the latest formula , the company s production profile pultruded grp epoxy curing is very good , completely overcome " any involvement " phenomenon
  由于采用了最新的工艺配方，我公司生产的环氧拉挤玻璃钢异型材固化度非常好，完全克服了“沾手”现象。
• It was investigated that how content and dispersion of different pigment , degree of curing and glass transference temperature of coating affect pigment resistance transference of uv curing optical fiber coding inks
  研究了颜料的自身性能如种类、含量和分散状态，涂膜的物理性能如固化度和玻璃化温度对颜料耐迁移性的影响。
• For a specified compaction and temperature cure cycle , the model was used to predict the resin flow front , the pr essure distribution and temperature profile of the assembly , which can be used to optimize the rfi process
  通过对不同工艺参数(压力制度、温度制度等)下成型过程的模拟，分析预测了树脂流动行为、前沿位置和充模时间；制品和模具内的温度分布以及树脂粘度和固化度的变化。
• The curing dynamic parameters of epoxy resin / org - mmt / mz nanocomposites were obtained by the modified avrami expression and autocatalytic expression . the curing energy of epoxy resin / org - mmt / toa systems with different degrees of curing were obtained by flynn - wall - ozawa method
  同时还利用了flynn - wall - ozawa方法求出环氧树脂桐油酸酐蒙脱土固化体系随着反应的进行不同固化度时对应的瞬间表观活化能。
• The formulation for the flow model is given using the finite element / control volume ( fe / cv ) technique based on darcy ' s law of creeping flow through a porous media . the heat transfer model is based on the two - dimensional , transient heat conduction equation , including heat generation . the cure kinetics model is based on kamal ' s model , and the degree of the resin cure as a function of temperature and time
  树脂流动阶段的模拟是根据牛顿流体在多孔介质中的渗流理论，应用darcy定律并使用有限元/控制体技术建立起来的；热传递模型是一个二维瞬态热传导方程，考虑树脂反应放热；树脂的固化模型利用了kamal提出的固化动力学方程，将固化度取为时间和温度的函数。
• Firstly , a finite element approach combining the temperature parametric method with real fictitious elements scheme was proposed for simulating the winding tension process ; secondly , in accordance with the cure kinetic and heat transfer theory , a corresponding finite element method was employed to calculate the distributions of temperature , cure degree and thermal stress fields during the cure process
  根据固化反应动力学理论和热传导理论，对具有金属内衬的复合材料纤维缠绕压力容器在固化工艺过程中瞬态温度、固化度和热应力场分布及其变化规律进行了数值分析。
• The physicochemical characterization was made in depth using various techniques for some resin matrices of advanced composites , such as epoxy resin matrix , phenolic resin matrix and bismaleimide resin . these techniques include infrared spectroscopy ( ir ) , nuclear magnetic resonance spectroscopy ( nmr ) , mass spectroscopy ( ms ) , liquid chromatography ( lc ) , thermal analysis ( ta ) and other techniques . the composition , structure , molecular weight , reactivity , reaction temperature and other properties related to performance of resin matrix were studied
  本论文采用红外光谱、核磁共振波谱、质谱、液相色谱、热分析等分析技术对实际使用的环氧树脂、酚醛树脂以及改性双马来酰亚胺树脂等先进复合材料树脂基体进行了物理化学表征，尤其是对与树脂基体性能密切相关的化学组成与结构、分子量、活性与反应温度、固化度等进行了表征；提出了树脂基体的固化反应机理，获得了树脂基体的固化反应动力学参数；对改性双马来酰亚胺树脂的热分解机理进行了分析，并得到了其热分解动力学数据。

• 固化度的日语：こうかど