固化速度的英文

• curing rate
• curing speed
• curing velocity

• "固化"英文翻译    welding; solidify; solidifyi ...
• "速度"英文翻译    velocity; speed; blast; bat
• "固化速率" 英文翻译 :    curing rate
• "标准化速度" 英文翻译 :    normalized velocity
• "玻璃化速度" 英文翻译 :    rate of vitrification
• "除极化速度" 英文翻译 :    rate of depolarization
• "磁化速度" 英文翻译 :    magnetizing velocity
• "风化速度" 英文翻译 :    weathering speed; weathering velocity
• "孵化速度" 英文翻译 :    incubation
• "符号化速度" 英文翻译 :    coding rate
• "归一化速度" 英文翻译 :    normalized velocity
• "进化速度" 英文翻译 :    rate of evolution; tempo of evolution
• "临界化速度" 英文翻译 :    critical fluidization velocity
• "硫化速度" 英文翻译 :    cure rate; curing rate
• "流化速度" 英文翻译 :    fluidizing velocity
• "流态化速度" 英文翻译 :    fluidization velocity; fluidizing velocity
• "慢化速度" 英文翻译 :    moderation velocity
• "汽化速度" 英文翻译 :    vaporization rate
• "熔化速度" 英文翻译 :    aufschmelzgeschwindigkeit; melting rate; rate of melting; speed of melting
• "炭化速度" 英文翻译 :    charing rate
• "同化速度" 英文翻译 :    assimilation rate
• "硝化速度" 英文翻译 :    rate of nitrification
• "氧化速度" 英文翻译 :    oxidation rate; oxidation speed
• "硬化速度" 英文翻译 :    curingprocess rate; rate of hardening; setting rate
• "自由化速度" 英文翻译 :    liberalization rate

• The rate of curing and consequently the rate of heat generation increase with the temperature .
  固化速度，因而还有放热速度，都随温度而增加。
• While the curing speed of intra - gallery was slower than that of extra - gallery , exfoliation never happened
  当蒙脱土层间的固化速度小于层外固化速度时，则不能。
• The fineness of fly ash influences on the solidifying velocity and coating film performance of polyurethane waterproof coating
  粉煤灰的细度对防水涂料的固化速度和涂膜性能都有影响。
• By variation of curing agents of epoxy and modifier of clay , the different curing speed of intra - gallery and extra - gallery could be obtained
  通过调节有机插层剂和固化剂，可以获得不同的层间和层外的固化速度。
• The resin produced by the flame - retardant products with high strength and mechanical properties , thermal deformation temperature , curing speed , and good soak
  该树脂所生产制品具有很高的阻燃性能和机械强度，热变形温度高，固化速度快，浸透性好。
• Results showed that temperatures have different effects on the curing speed of resin , the rate of moisture transmission , the degree of plastic melting and the degree of wheat straw decomposition
  结果表明，热压温度对板坯中胶黏剂的固化速度、水分传递速度、塑料熔融程度、麦秸分解程度等都有不同程度的影响。
• Tightsen uv adhesives can be used for bonding , sealing , encapsulating of glass , plastic etc . . cure in seconds , when exposed to uv light soures , with high shear strength and excellent optical charactors
  泰盛uv胶系列产品使用方便、固化速度快、粘接强度高，具有良好的光学性能，可用于粘接、密封、固定和填充，适用基材广泛，如玻璃、金属、塑胶等。
• Xt - p1007 unsaturated polyester resin is reactive flame retardant resin , heat distortion temperature , curing speed , good soak and toughness , both major requirements for flame - retardant and high mechanical strength requirements pultruded products
  P1007不饱和聚酯树脂是反应型阻燃树脂，热变形温度高，固化速度快，优良的浸透性和韧性，主要应用于既要求阻燃又要求机械强度高的拉挤产品。
• It was found that exfoliation of clay occurred when the curing speed of intra - gallery was faster than that of extra - gallery even the epoxy / clay compositions were cured at any temperatures , for any time and with any types of curing agents
  研究表明，当蒙脱土层间的固化速度大于层外固化速度时，采用不同的固化剂，固化不同时间，在不同的温度下固化都可以得到剥离型的环氧/蒙脱土纳米复合材料。
• The results show that the gel time of the resol prepared in this paper is much longer than that of resol catalyzed with normal alkali such as ammonia and it is more stable when temperature is under 160 ; while temperature exceeds 160 , it cures very fast
  结果表明，合成的酚醛树脂中有大量醚键，常温下它的凝胶时间很长，固化速度慢，温度大于160后，醚键分解产生甲醛，促进固化，凝胶时间迅速减小，固化很快。

• 固化速度的日语：こうかそくど