拧紧力矩的英文

• anziehdrehmoment

• "拧紧"英文翻译    screw home; screw up; tighte ...
• "力矩"英文翻译    force moment; moment; moment ...
• "螺母的拧紧力矩仍为136" 英文翻译 :    nm 12mm
• "周向拧紧力" 英文翻译 :    circumferential makeup
• "夹紧力矩" 英文翻译 :    clamping torque
• "扭紧力矩" 英文翻译 :    t tightening torgue
• "上紧力矩" 英文翻译 :    tightening torque
• "拧紧" 英文翻译 :    screw home; screw up; tighten; buck-up
• "夹紧力" 英文翻译 :    chucking effect; clamp force; clamping force
• "扣紧力" 英文翻译 :    tightening force
• "锁紧力" 英文翻译 :    tight locking force
• "销紧力" 英文翻译 :    locking force
• "压紧力" 英文翻译 :    compacting force; packing force; pressing force
• "预紧力" 英文翻译 :    initial tension; predetermincd tension; preliminary tension; preload; pretightening force; pretightening load; pretightening up force
• "张紧力" 英文翻译 :    tension
• "螺丝，拧紧" 英文翻译 :    screw
• "拧紧板" 英文翻译 :    anschraubplatte
• "拧紧的" 英文翻译 :    screwed
• "拧紧头" 英文翻译 :    tappet head
• "拧紧线" 英文翻译 :    stay wire
• "力矩" 英文翻译 :    [力学] force moment; moment; moment of force; torque 俯仰力矩 pitching moment; 合力矩 resultant moment
• "垫片压紧力" 英文翻译 :    gasket seating stress
• "拉紧力装置" 英文翻译 :    tensioning device
• "密封紧力" 英文翻译 :    sealing load
• "模具夹紧力" 英文翻译 :    die hold-down pressure

• Chapter three makes clear the importance of preload , and deals with the theories on the relationship between preload and torque , angle and extension of the bolt from various aspects
  第三章由扭矩控制的实质? ?预紧力，点明了预紧力的重要性，预紧力与拧紧力矩、螺母转角、螺栓伸长的关系，对其进行了理论方面的研究和探讨。
• Using the optimum calculating method , some important technical parameters could be determined , that is , optimum supporting force , allowable deformation of rock mass , cross section area of u - shape set , pre - tight force and diameter of the bolt as well as torque to provide optimum supporting force
  用这一计算方法能求出岩石恒阻支护的重要技术参数，即最优（小）恒阻支护力、围岩最大允许变形量、恒阻u型钢支架的截面积、联接螺栓的预紧力和直径及最优支护力的拧紧力矩。
• A series of static and fatigue experiments which include lots of specimens are performed on bolted composite laminates that include different sizes , different lay orientations and different torques . dye - enhanced x - radiography is used to check the progressive damage process as evaluation techniques , which can be made nondestructively . finally , the ultimate strength and fatigue life of composite bolted joints in static tension and
  层合板接头的试验研究考虑了多种几何尺寸、多种铺层及不同拧紧力矩对其静强度及疲劳性能的影响,同时使用渗透剂增强的x射线图象技术对静载和疲劳损伤扩展及累积过程进行了无损检测,并对其进行了分析探讨。